subject
Engineering, 22.04.2021 17:40 WhiteWinterRose

Data from tests of a Peerless end suction Type 1440 pump operated at 1750 rpm with a 14.0 in. diameter impeller are: flowrate [gpm] total head [ft] power input[hp]
290 204 30
440 203 35
550 200 40
790 187 45
920 175 50
1280 135 60
Plot the performance curves for this pump; include a curve of efficiency versus volume flow rate. Locate the best efficiency point and specify the pump efficiency, head rise, and flow rateat this point.

ansver
Answers: 2

Another question on Engineering

question
Engineering, 04.07.2019 18:10
Slip occurs via two partial dislocations because of (a) the shorter path of the partial dislocation lines; (b) the lower energy state through partial dislocations; (c) the charge balance.
Answers: 1
question
Engineering, 04.07.2019 18:10
Which of the following controllers anticipates the future from the slope of errors over time? a)-proportional b)-on/off c)-integral d)-derivative.
Answers: 2
question
Engineering, 04.07.2019 19:10
What is the chief metrological difference between measuring with a microscope and with an electronic comparator? a. the microscope is limited to small workpieces.a. the microscope is limited to small workpieces. c. the comparator can only examine one point on the workpiece. d. the microscope carries its own standard.
Answers: 1
question
Engineering, 04.07.2019 19:20
Aseries piping system conveys methyl alcohol. the system consists of 70 m of 1- nominal pipe follow by 50 m of 2-nominal pipe, both schedule 40 commercial steel. the 1-nominal pipe contains 3 90° elbows (regular) anda fully open gate valve, all threaded. the pressure drop through the system is 150 kpa. determine the volume flow rate through the system that is horizontally laid.
Answers: 1
You know the right answer?
Data from tests of a Peerless end suction Type 1440 pump operated at 1750 rpm with a 14.0 in. diamet...
Questions
Questions on the website: 13722363