subject
Engineering, 23.04.2021 03:50 tre1124

A landfill area of (150 m x 100 m) is available for handling 25 years’ municipal solid waste (MSW) for a town of 5,00,000 people. Out of the total landfill area only 80% is actually available for land fill and other is used for auxiliary services. Assuming that average per capita MSW discard per year in town is 0.05 tons, landfill density is 500 kg/m³, and that the 15 percent of the actual landfill cell volume is used for soil cover, estimate (a) the landfill lift in one year. (b) Number of years for which the land fill can be used if the landfill can’t be increased beyond 25m​

ansver
Answers: 2

Another question on Engineering

question
Engineering, 04.07.2019 18:10
The filament of an incandescent lamp has a temperature of 2000k. calculate the fraction of radiation emitted in the visible light band if the filament is approximated as blackbody
Answers: 2
question
Engineering, 04.07.2019 18:10
Ahot wire operates at a temperature of 200°c while the air temperature is 20°c. the hot wire element is a tungsten wire of 5 um diameter and 2 mm in length. plot using excel current, heat transfer and heat generated by the wire for air velocity varying from 1-10 m/s in steps of lm/s? matlab the sensor voltage output, resistance, or assume nu 0.989 re033pr13 take air properties at tr (200°c20°c)/2 = 110°c properties of tungsten: c 0.13 kj/kg.k 3 p 19250 kg/m k (thermal conductivity) = 174 w/m.k
Answers: 2
question
Engineering, 04.07.2019 18:20
Describe one experiment in which the glass transition temperature and melting temperature of a totally amorphous thermoplastic material can be determined. show the relevant experimental results in a diagram which should be properly annotated with the two temperatures clearly marked. what is likely to happen to the curve in the diagram if the amorphous polymer is replaced by a thermosetting type?
Answers: 2
question
Engineering, 04.07.2019 19:10
10 kg of co2 is initially contained at 400 kpa and 300 k. the gas constant for carbon dioxide is 189 j/lkg k) and has a specific heat ratio, k, of 1.289. isentropic expansion then occurs until the pressure is 200 kpa. a) determine the initial volume of co2 in m. b) determine the final temperature in k. c) determine the work done by the system during the expansion kl.
Answers: 2
You know the right answer?
A landfill area of (150 m x 100 m) is available for handling 25 years’ municipal solid waste (MSW) f...
Questions
question
History, 13.09.2019 19:30
Questions on the website: 13722363