Engineering, 23.04.2021 15:40 jessicawelch25

A 1.75-cm diameter naphthalene mothball is suspended in an air stream at 280 K, 1.0 atm, and constant velocity of 1.4 m/s. Solid naphthalene exerts a vapor pressure of 2.8 Pa at 280 K. Consequently, the naphthalene very slowly sublimes into the passing air stream, with the rate limited by convective mass transfer. The density of solid naphthalene is 1.14 g/cm3, and the molecular weight is 128 g/mole. How long will it take for the mothball to shrink to half of its original diameter? Remember: as the mothball shrinks, its diameter is decreasing, which in turn affects the Reynolds and Sherwood numbers.

Answers: 3

Show answers

Another question on Engineering

Engineering, 04.07.2019 18:10

Awall of 0.5m thickness is to be constructed from a material which has average thermal conductivity of 1.4 w/mk. the wall is to be insulated with a material having an average thermal conductivity of 0.35 w/mk so that heat loss per square meter shall not exceed 1450 w. assume inner wall surface temperature of 1200°c and outer surface temperature of the insulation to be 15°c. calculate the thickness of insulation required.

Answers: 3

Answer

Engineering, 04.07.2019 18:20

Derive the correction factor formula for conical nozzle i=-(1+ cosa) and calculate the nozzle angle correction factor for a nozzle whose divergence hal-fangle is 13 (hint: assume that all the mass flow originates at the apex of the cone.

Answers: 3

Answer

Engineering, 04.07.2019 18:20

Air flows over a heated plate àt a velocity of 50m/s. the local skin factor coefficient at a point on a plate is 0.004. estimate the local heat transfer coefficient at this point.the following property data for air are given: density = 0.88kg/m3 , viscosity 2.286 x 10 ^-5 kgm/s , k = 0.035w/mk ,cp = 1.001kj/kgk. use colburn reynolds analogy.

Answers: 1

Answer

Engineering, 04.07.2019 19:10

Air inially occupying a volume of 1 m2 at 100 kpa, 27 c undergoes three internally reversible processes in series. process 1-2 compression to 500 kpa during which pv constant process 2-3 adiabatic expanslon to 100 kpa process 3-1: constant-pressure expansion to 100 kpa (a) calculate the change of entropy for each of the three processes. (b) calculate the heat and work involved in each process. (c) is this cycle a power cycle or refrigeration cycle?

Answers: 3

Answer

You know the right answer?

A 1.75-cm diameter naphthalene mothball is suspended in an air stream at 280 K, 1.0 atm, and constan...

Questions