Engineering, 23.04.2021 19:30 justyne2004

Which option identifies what Steven should use during the process in the following scenario and correctly explains why? Steven is conducting a life-cycle inventory of all of the energy and raw materials used in every stage of the production of an eco-friendly home. It is important that this is done correctly since the impact analysis evaluates the effects of the product on the environment, and also on human health, based upon the product’s energy and raw material input and output.
Exact numbers should be used so that calculations can be as precise as possible.
Exact numbers should be used, but calculations can be rounded to the nearest estimate.
Estimated numbers should be used so that calculations can be as variable as possible.
Estimated numbers should be used so that calculations can be as simple as possible.

Answers: 1

Show answers

Another question on Engineering

Engineering, 04.07.2019 18:10

The mass flow rate of the fluid remains constant in all steady flow process. a)- true b)- false

Answers: 1

Answer

Engineering, 04.07.2019 18:10

Aflywheel accelerates for 5 seconds at 2 rad/s2 from a speed of 20 rpm. determine the total number of revolutions of the flywheel during the period of its acceleration. a.5.65 b.8.43 c. 723 d.6.86

Answers: 2

Answer

Engineering, 04.07.2019 18:10

Afour cylinder four-stroke in-line engine has a stroke of 160mm, connecting rod length of 150mm, a reciprocating mass of 3kg and its firing order is 1-3-4-2. the spacing between cylinders is 100mm. i. show that the engine is in balance with regard to the primary inertia forces and primary 3. a and secondary inertia couples. li determine the out of balance secondary inertia force ii. propose ways of balancing this out of balance force and discuss the challenges that will arise

Answers: 3

Answer

Engineering, 04.07.2019 18:10

Adouble-strand no. 60 roller chain is used to transmit power between a 13-tooth driving sprocket rotating at 300 rev/min and a 52-tooth driven sprocket. a) what is the allowable horsepower of this drive? b) estimate the center-to-center distance if the chain length is 82 pitches. c) estimate the torque and bending force on the driving shaft by the chain if the actual horsepower transmitted is 30 percent less than the corrected (allowable) power.

Answers: 3

Answer

You know the right answer?

Which option identifies what Steven should use during the process in the following scenario and corr...

Questions