Engineering, 25.04.2021 20:40 littlesami105
water is flowing uniformly in a finished - concrete channel of trapezoidal cross section with a bottom width of 0.8 m, side slope of 1 : 1 and the bottom slop of 0.0001. if the flow depth is measured to be 0.52 m, determine the flow rate of water through the channel.[take the meaning coefficient of the finished concrete as 0.012]
Answers: 3
Engineering, 04.07.2019 18:10
Ajournal bearing has a journal diameter of 3.250 in with a unilateral tolerance of 20.003 in. the bushing bore has a diameter of 3.256 in and a unilateral tolerance of 0.004 in. the bushing is 2.8 in long and supports a 700-lbf load. the journal speed is 900 rev/min. find the minimum oil film thickness and the maximum film pressure for both sae 20 and sae 20w-30 lubricants, for the tightest assembly if the operating film temperature is 160°f. a computer code is appropriate for solving this problem.
Answers: 3
Engineering, 04.07.2019 18:10
Draw the engineering stress-strain curve for (a) bcc; (b) fcc metals and mark important points.
Answers: 1
Engineering, 04.07.2019 18:10
Aturning operation is performed with following conditions: rake angle of 12°, a feed of 0.35 mm/rev, and a depth of cut of 1.1 mm. the work piece is aluminum alloy 6061 with t6 heat treatment (a16061-t6). the resultant chip thickness was measured to be 1.0 mm. estimate the cutting force, fc. use shear stress of 207 mpa and coefficient of friction on the tool face of 0.6.
Answers: 1
Engineering, 04.07.2019 19:10
Apressure vessel with an r/t 20 cannot be treated as thin walled vessel. a)-trune b)- false
Answers: 3
water is flowing uniformly in a finished - concrete channel of trapezoidal cross section with a bott...
Mathematics, 27.02.2022 06:00
Mathematics, 27.02.2022 06:40
Social Studies, 27.02.2022 06:40
Mathematics, 27.02.2022 07:00
History, 27.02.2022 08:30
SAT, 27.02.2022 09:00
Mathematics, 27.02.2022 14:00
Mathematics, 27.02.2022 14:00
Social Studies, 27.02.2022 14:00
History, 27.02.2022 14:00
Social Studies, 27.02.2022 14:00
Mathematics, 27.02.2022 16:40