Engineering, 27.04.2021 18:50 angelasequen5656
Given that there are 1/4 approximately 12 no. 1 inch (internal diameter) steel pipes; a) Determine the effective length of the pipes to the wet areas given that the required pressure is 39.24kPa at a discharge flow rate of 0.001 m/s.
Answers: 2
Engineering, 04.07.2019 18:10
Steel is coated with a thin layer of ceramic to protect against corrosion. what do you expect to happen to the coating when the temperature of the steel is increased significantly? explain.
Answers: 1
Engineering, 04.07.2019 18:10
Ajournal bearing has a journal diameter of 3.250 in with a unilateral tolerance of 20.003 in. the bushing bore has a diameter of 3.256 in and a unilateral tolerance of 0.004 in. the bushing is 2.8 in long and supports a 700-lbf load. the journal speed is 900 rev/min. find the minimum oil film thickness and the maximum film pressure for both sae 20 and sae 20w-30 lubricants, for the tightest assembly if the operating film temperature is 160°f. a computer code is appropriate for solving this problem.
Answers: 3
Engineering, 04.07.2019 18:10
The higher the astm grain size number, the finer the gran is. a)-true b)-false
Answers: 2
Engineering, 04.07.2019 18:10
Which of the following ziegler nichols tuning methods the response of the controller to a step input should exhibit an s-shaped curve? a)-open loop mode b)-closed loop mode c)-both modes (open & closed) d)-none of the modes (open & closed)
Answers: 3
Given that there are 1/4 approximately 12 no. 1 inch (internal diameter) steel pipes; a) Determine t...
Mathematics, 14.12.2019 18:31
English, 14.12.2019 18:31
History, 14.12.2019 18:31
Physics, 14.12.2019 18:31
History, 14.12.2019 18:31
English, 14.12.2019 18:31
History, 14.12.2019 18:31
Mathematics, 14.12.2019 18:31
Mathematics, 14.12.2019 18:31
Mathematics, 14.12.2019 18:31
Mathematics, 14.12.2019 18:31
Biology, 14.12.2019 18:31