Engineering, 29.04.2021 19:00 maribel2421

An orthogonal cut 3.18 mm wide is made at a speed of 33.5 m/min and feed of 0.25 mm/rev with a high-speed steel tool having a rake angle of 18o. The chip thickness ratio is 0.58, the cutting force is 1379 N, and its associated normal force Ft is 356 N. Determine the Chip thickness Shear plane angle Magnitude of the resultant force Coefficient of friction on the face of the tool Magnitude of the friction force and associated normal force Magnitude of the shearing force and associated normal force Specific energy

Answers: 1

Show answers

Another question on Engineering

Engineering, 04.07.2019 18:10

Aflywheel accelerates for 5 seconds at 2 rad/s2 from a speed of 20 rpm. determine the total number of revolutions of the flywheel during the period of its acceleration. a.5.65 b.8.43 c. 723 d.6.86

Answers: 2

Answer

Engineering, 04.07.2019 18:20

Most leaks in reciprocating air compressors can be detected and minimized by: (clo4) a)-detecting leakage areas using ultrasonic acoustic detector. b)-tightening joints and connections c)-replacing faulty equipment d)-all of the given options

Answers: 2

Answer

Engineering, 04.07.2019 19:20

Acircular pipe of 30mm outside diameter is placed in an airstream at 30 c and latm pressure. the air moves in cross flow over the pipe at 20 m/s, while the outer surface of the pipe is maintained at 110 c. what is the drag force exerted on the pipe per unit length? what is the rate of heat transfer from the pipe per unit length?

Answers: 1

Answer

Engineering, 06.07.2019 03:10

Consider two concentric spheres forming an enclosure with diameters of 12 cm and 18 cm the spheres are maintained at uniform temperatures ti-50°c and t2 = 250°c and have emissivities .45 and .8, respectively. determine the net rate of radiation heat transfer between the two spheres per unit surface area.

Answers: 1

Answer

You know the right answer?

An orthogonal cut 3.18 mm wide is made at a speed of 33.5 m/min and feed of 0.25 mm/rev with a high-...

Questions