Engineering, 30.04.2021 02:50 mrmendrala
Which option explains why an environmental group is interested in the project in the following scenario?
An environmental group is partnering with a team of chemical engineers to develop oil for machines that will increase their efficiency while decreasing the usage of fuel.
Decreasing fuel usage leads to a reduction in carbon emissions, which is a significant "green" issue.
Environmentalists like to see increased power in machines to cut down on the amount of waste production.
Decreased fuel costs will allow the group to have more money to focus on their issues.
Sustainable machines are the primary goal of environmentalists.
Answers: 2
Another question on Engineering
Engineering, 04.07.2019 18:10
Afour cylinder four-stroke in-line engine has a stroke of 160mm, connecting rod length of 150mm, a reciprocating mass of 3kg and its firing order is 1-3-4-2. the spacing between cylinders is 100mm. i. show that the engine is in balance with regard to the primary inertia forces and primary 3. a and secondary inertia couples. li determine the out of balance secondary inertia force ii. propose ways of balancing this out of balance force and discuss the challenges that will arise
Answers: 3
Engineering, 04.07.2019 18:10
Give heat transfer applications for the following, (i) gas turbines (propulsion) ) gas turbines (power generation). (iii) steam turbines. (iv) combined heat and power (chp). (v) automotive engines
Answers: 1
Engineering, 04.07.2019 18:20
A2-m rigid tank initially contains saturated water vapor at 100 kpa. the tank is connected to a supply line through a valve. steam is flowing in the supply line at 600 kpa and 300 c. the valve is opened, and steam is allowed to enter the tank until the pressure in the tank reaches the line pressure, at which point the valve is closed. a thermometer placed in the tank indicates that the temperature at the final state is 200°c. determine (a) the mass of steam that has entered the tank (b) the amount of heat transfer.
Answers: 3
Engineering, 05.07.2019 10:10
What is the correct way to measure the overall length of a boat? measure from the tip of the bow to the highest point on the gunwale. measure from the tip of the bow in a straight line to the stern of the boat. measure from the tip of the bow in a straight line to the back seat. measure from port to starboard at the boat's widest point.
Answers: 1
You know the right answer?
Which option explains why an environmental group is interested in the project in the following scena...
Questions
Computers and Technology, 12.07.2019 08:30
Mathematics, 12.07.2019 08:30
Biology, 12.07.2019 08:30
Mathematics, 12.07.2019 08:30
English, 12.07.2019 08:30
