A linear variable displacement transducer (LVDT) converts linear displacement (the input) into an AC voltage (the output), and the RMS voltage output increases linearly with displacement. The manufacturer claims a sensitivity of 0.0100 V/mm. (a) For a maximum displacement (input span) of 25 mm, calculate the ideal output span voltage. (b) Suppose the instrument is faulty, and the actual sensitivity is 0.0103 V/mm. Calculate the output span for this case. Also calculate the percentage error in output span. Is this a bias or a random (precision) error

Amass of m 1.5 kg of steam is contained in a closed rigid container. initially the pressure and temperature of the steam are: p 1.5 mpa and t 240°c (superheated state), respectively. then the temperature drops to t2= 100°c as the result of heat transfer to the surroundings. determine: a) quality of the steam at the end of the process, b) heat transfer with the surroundings. for: p1.5 mpa and t 240°c: enthalpy of superheated vapour is 2900 kj/kg, specific volume of superheated vapour is 0. 1483 m/kg, while for t 100°c: enthalpy of saturated liquid water is 419kj/kg, specific volume of saturated liquid water is 0.001043m/kg, enthalpy of saturated vapour is 2676 kj/kg, specific volume of saturated vapour is 1.672 m/kg and pressure is 0.1 mpa.

Line joining liquid phase with liquid and solid phase mixture is known as: a) liquidus b) solidus c) tie line d) none of the mentioned

When using the ohmmeter function of a digital multimeter, the leads are placed in what position relative to the component being tested? a. parallel b. control c. series d. line