Engineering, 03.05.2021 16:40 NateTheBeast12

Q2 [45 marks] Consider Ibra region where the installed solar panels cost on average 2 OMR /W. [10 marks] What is the cost to install a 5kW PV system for a residence?

[10 marks] If the solar irradiance in Ibra is on average 800W/m2 and the installed panels have efficiency of 18%. How many panels are required if the panel’s area is 2m2?

[15 marks] Assume Ibra has an average of 10 day-hours, dusty environment which causes the efficiency of the solar system to drop by 10% on average, and 30 cloudy days/year which cause the efficiency of the solar panels drops by 50%. If electrical power cost per kWh is 0.05 OMR determine the break-even time for the 5kW PV system.

[10 marks] If the system to be off-grid, what would be the backup time if three 12-V batteries were selected each with a capacity of 200Ah. Assume that you can discharge the batteries up to 80% of their capacities.

Answers: 3

Show answers

Another question on Engineering

Engineering, 04.07.2019 18:10

Coiled springs ought to be very strong and stiff. si3n4 is a strong, stiff material. would you select this material for a spring? explain.

Answers: 2

Answer

Engineering, 04.07.2019 18:10

Which of the following ziegler nichols tuning methods the response of the controller to a step input should exhibit an s-shaped curve? a)-open loop mode b)-closed loop mode c)-both modes (open & closed) d)-none of the modes (open & closed)

Answers: 3

Answer

Engineering, 04.07.2019 18:10

Ifa component is made of two or more materials with different modulus of elasticity (e), it is called a composite member and we calculate the factor·n". mention the formula for calculating n". also, ifn> 1, explain what will happen to the 1. transformed.gi) ifn 1, what will happen to the material when transformed material when

Answers: 1

Answer

Engineering, 04.07.2019 18:20

Air flows over a heated plate àt a velocity of 50m/s. the local skin factor coefficient at a point on a plate is 0.004. estimate the local heat transfer coefficient at this point.the following property data for air are given: density = 0.88kg/m3 , viscosity 2.286 x 10 ^-5 kgm/s , k = 0.035w/mk ,cp = 1.001kj/kgk. use colburn reynolds analogy.

Answers: 1

Answer

You know the right answer?

Q2 [45 marks] Consider Ibra region where the installed solar panels cost on average 2 OMR /W. [10...

Questions