Engineering, 03.05.2021 20:00 Irenesmarie8493
When a coil is connected across a 120 V, 60 Hz supply, it draws a current of 1.8 A and dissipates 60 W.
The impedance is ohms
The resistance is ohms
The inductive reactance is ohms
The Inductance is Henrys
Answers: 2
Another question on Engineering
Engineering, 04.07.2019 18:10
Abrake has a normal braking torque of 2.8 kip in and heat-dissipating cast-iron surfaces whose mass is 40 lbm. suppose a load is brought to rest in 8.0 s from an initial angular speed of 1600 rev/min using the normal braking torque; estimate the temperature rise of the heat dissipating surfaces.
Answers: 3
Engineering, 04.07.2019 18:10
Water in a partially filled large tank is to be supplied to the roof top, which is 8 m above the water level in the tank, through a 2.2-cm-internal-diameter pipe by maintaining a constant air pressure of 300 kpa (gage) in the tank. if the head loss in the piping is 2 m of water, determine the discharge rate of the supply of water to the roof top in liters per second.
Answers: 3
Engineering, 04.07.2019 18:10
Assuming compressible flow of air and that the measurements are done at flagstaff a pitot static tube that gives the difference of total and static pressure measures 0.35 m of mercury. what is the velocity of air? assume the temperature to be 300k. (submit your excel or matlab calculation sheet)
Answers: 1
Engineering, 04.07.2019 18:10
Which of the following controllers anticipates the future from the slope of errors over time? a)-proportional b)-on/off c)-integral d)-derivative.
Answers: 2
You know the right answer?
When a coil is connected across a 120 V, 60 Hz supply, it draws a current of 1.8 A and dissipates 60...
Questions
Health, 02.04.2020 23:47
Mathematics, 02.04.2020 23:49
Biology, 02.04.2020 23:49
English, 02.04.2020 23:49
Mathematics, 02.04.2020 23:49
Computers and Technology, 02.04.2020 23:49
