Engineering, 03.05.2021 22:40 gabe7774

The cylindrical portion of a compressed-air tank is fabricated of steel plate that is welded along a helix that makes an angle of 70 with respect to the longitudinal axis of the tank. The inside diameter of the cylinder is 48 in., the wall thickness is 0.5 in., and the internal pressure is 240 psi. Determine the following quantities for the cylindrical portion of the tank: (a) the axial stress a and the hoop stress h, (b) the normal stress and shear stress on planes parallel and perpendicular to the weld, (c) the maximum inplane shear stress, and (d) the absolute maximum shear

Answers: 3

Show answers

Another question on Engineering

Engineering, 04.07.2019 18:10

Ajournal bearing has a journal diameter of 3.250 in with a unilateral tolerance of 20.003 in. the bushing bore has a diameter of 3.256 in and a unilateral tolerance of 0.004 in. the bushing is 2.8 in long and supports a 700-lbf load. the journal speed is 900 rev/min. find the minimum oil film thickness and the maximum film pressure for both sae 20 and sae 20w-30 lubricants, for the tightest assembly if the operating film temperature is 160°f. a computer code is appropriate for solving this problem.

Answers: 3

Answer

Engineering, 04.07.2019 18:10

Which one from below is not one of the reasons of planning failures? (clo3) a)-planner is careless. b-planner spend less time in the field but more time on the desk c)-planner is not qualified d)-planner does not have sufficient time to properly plan

Answers: 3

Answer

Engineering, 04.07.2019 19:10

Starting wih an energy balance on a rectangular volume element, derive the one- dimensional transient heat conduction equation for a plane wall with constant thermal conductivity and no heat generation.

Answers: 1

Answer

Engineering, 06.07.2019 02:30

Air (c-1.006 kj/kg.k, r-0.287 kj/kg.k) enters a nozzle steadily at 280 kpa and 77°c with a velocity of 50 m/s and exits at 85 kpa and 320 m/s. the heat losses from the nozzle to the surrounding medium at 20°c are estimated to be 3.2 kj/kg. determine (a) the exit temperature and (b) the total entropy change for this process. solve this problem using constant specific heats.

Answers: 1

Answer

You know the right answer?

The cylindrical portion of a compressed-air tank is fabricated of steel plate that is welded along a...

Questions