Engineering, 04.05.2021 01:10 aidenmanpig

Question 4 A steel rod of 20 mm diameter passes centrally through a copper tube of 50 mm external diameter
and 40 mm internal diameter. The tube is closed at each end by rigid plates of negligible thickness.
The nuts are tightened lightly home on the projecting parts of the rod. If the temperature of the
assembly is raised by 50°C, calculate the stresses developed in copper and steel. Take E for steel
and copper as 200 GN/m² and 100 GN/m² and α for steel and copper as 12x 10-6
per °C and 18 x
10-6
per °C

Answers: 3

Show answers

Another question on Engineering

Engineering, 03.07.2019 15:10

If you were designing a bumper for a car, would you prefer it to exhibit elastic or plastic deformation? why? consider the functions of a bumper in both a minor "fender-bender" and a major collision.

Answers: 1

Answer

Engineering, 04.07.2019 18:10

Water in a partially filled large tank is to be supplied to the roof top, which is 8 m above the water level in the tank, through a 2.2-cm-internal-diameter pipe by maintaining a constant air pressure of 300 kpa (gage) in the tank. if the head loss in the piping is 2 m of water, determine the discharge rate of the supply of water to the roof top in liters per second.

Answers: 3

Answer

Engineering, 04.07.2019 18:10

Hydraulic fluid with a sg. of 0.78 is flowing through a 1.5 in. i.d. pipe at 58 gal/min. the fluid has an absolute viscosity of 11.8 x 105 lbf-sec/ft2. is the flow laminar, turbulent or within the critical range? give both a numerical reynolds number and a term answer.

Answers: 3

Answer

Engineering, 04.07.2019 18:20

Ahe-xe mixture containing a 0.75 mole fraction of helium is used for cooling electronics in an avionics application. at a temperature of 300 k and atmospheric pressure, calculate the mass fraction of helium and the mass density, molar concentration and molecular weight of the mixture. if the cooling capacity is 10 l, what is the mass of the coolant?

Answers: 3

Answer

You know the right answer?

Question 4 A steel rod of 20 mm diameter passes centrally through a copper tube of 50 mm external...

Questions