subject
Engineering, 04.05.2021 01:20 dakshshberry

5. (5 points) Select ALL statements that are TRUE A. For flows over a flat plate, in the laminar region, the heat transfer coefficient is decreasing in the flow direction B. For flows over a flat plate, in the turbulence region, the heat transfer coefficient is decreasing in the flow direction C. For flows over a flat plate, the transition from laminar to turbulence flow only happens for rough surface D. For flows over a flat plate, if the length of the plate in the flow direction is long enough, the flows will inevitably become turbulent E. In general, turbulence flows have a larger heat transfer coefficient compared to laminar flows 6. (5 points) Select ALL statements that are TRUE A. For the flow in a pipe with constant cross-section area, both hydrodynamic and thermal boundary layer thicknesses increasingly grow in the flow direction B. In the hydrodynamic fully developed region, the mean velocity of the flow becomes constant C. In the thermally fully developed region, the mean temperature of the flow becomes constant D. For internal flows, if Pr>1, the flows become hydrodynamically fully developed before becoming thermally fully developed E. For internal flows, if Pr>1, the flows become thermally fully developed before becoming hydrodynamically fully developed

ansver
Answers: 2

Another question on Engineering

question
Engineering, 04.07.2019 18:10
At 12 noon, the count in a bacteria culture was 400; at 4: 00 pm the count was 1200 let p(t) denote the bacteria cou population growth law. find: (a) an expression for the bacteria count at any time t (b) the bacteria count at 10 am. (c) the time required for the bacteria count to reach 1800.
Answers: 1
question
Engineering, 04.07.2019 18:20
Amixture of slurry and mud is to be pumped through a horizontal pipe of diameter 500 mm. the fluid behaves as a bingham plastic with a yield stress of 30 pa and viscosity 0.04 pa.s. describe the effects of the shear stress through a transverse section of the pipe by plotting the variation in shear stress and velocity profile: (i) just before the slurry starts to move (ii) as the slurry flows when the pressure gradient is double that in part (i)
Answers: 3
question
Engineering, 04.07.2019 19:10
Asteam is contained in a rigid tank with a volume of 1 m3. initially, the pressure and temperature are 7 bar and 500 oc, respectively. the temperature drops due to cooling process. determine: (1) the temperature at which condensation begins in °c, (2) the fraction of the total mass that has condensed when the pressure decreased to 0.5 bar. (3) the volume in m3 occupied by saturated liquid at the final state?
Answers: 3
question
Engineering, 04.07.2019 19:10
Air inially occupying a volume of 1 m2 at 100 kpa, 27 c undergoes three internally reversible processes in series. process 1-2 compression to 500 kpa during which pv constant process 2-3 adiabatic expanslon to 100 kpa process 3-1: constant-pressure expansion to 100 kpa (a) calculate the change of entropy for each of the three processes. (b) calculate the heat and work involved in each process. (c) is this cycle a power cycle or refrigeration cycle?
Answers: 3
You know the right answer?
5. (5 points) Select ALL statements that are TRUE A. For flows over a flat plate, in the laminar reg...
Questions
question
Mathematics, 09.02.2021 21:40
question
Mathematics, 09.02.2021 21:40
question
Computers and Technology, 09.02.2021 21:40
question
Mathematics, 09.02.2021 21:40
question
Biology, 09.02.2021 21:40
question
Mathematics, 09.02.2021 21:40
question
Mathematics, 09.02.2021 21:40
question
Mathematics, 09.02.2021 21:40
Questions on the website: 13722360