Engineering, 05.05.2021 14:00 starwarsfan1975
Heat transfer from a transistor may be enhanced by
inserting it in an aluminium sleeve (k = 200 W/m −
K) having integrally machined longitudinal fins on its
outer surface. Transistor radius and height are r1 =
2 mm & H = 6 mm respectively, while the fins are of
length L = r3 − r2 = 10 mm of uniform thickness t =
0.7 mm. The thickness of the sleeve base is r2 − r1 =
1 mm. Contact resistance of the sleeve transistor
interface is Rt, c
′′ = 10−3 m2
.K/W. Air at T∞ = 20°C
flows over the fin surface providing uniform
convection with h = 25 W
m2−K
. Assume 1-D radial heat
transfer,
a) Sketch the equivalent thermal circuit for heat
transfer from transistor case (r = r1) to the air.
Label each resistance. [1]
b) Evaluate each resistance. [2]
c) If the temperature of the transistor case is T1 = 80 °C, what is the rate of heat transfer from
the sleeve?
Answers: 2
Engineering, 03.07.2019 14:10
If the thermal strain developed in polyimide film during deposition is given as 0.0044. assume room temperature is kept at 17.3 c, and thermal coefficient of expansion for the film and the substrate are 54 x 10^-6c^-1 and 3.3 x 10^-6c^-1respectively. calculate the deposition temperature.
Answers: 3
Engineering, 04.07.2019 18:10
Refrigerant 134a enters an insulated compressor operating at steady state as saturated vapor at -26°c with a volumetric flow rate of 0.18 m3/s. refrigerant exits at 9 bar, 70°c. changes in kinetic and potential energy from inlet to exit can be ignored. determine the volumetric flow rate at the exit, in m3/s, and the compressor power, in kw.
Answers: 1
Engineering, 04.07.2019 18:10
Machinery that is a key part of the process and without which the plant or process cannot function is classifed as: (clo4) a)-critical machinery b)-essential machinery c)-general purpose machinery d)-none of the specified options.
Answers: 1
Engineering, 04.07.2019 18:20
Vibration monitoring this technique uses the noise or vibration created by mechanical equipment and in seme cases by plant systems to detemine their actual condtion. a)- true b)- false
Answers: 2
Heat transfer from a transistor may be enhanced by
inserting it in an aluminium sleeve (k = 200 W/...
Mathematics, 12.03.2021 16:00
Computers and Technology, 12.03.2021 16:00
Mathematics, 12.03.2021 16:00
Mathematics, 12.03.2021 16:00
Computers and Technology, 12.03.2021 16:00
Computers and Technology, 12.03.2021 16:00
Physics, 12.03.2021 16:00
Spanish, 12.03.2021 16:00
Biology, 12.03.2021 16:00
Computers and Technology, 12.03.2021 16:00
Mathematics, 12.03.2021 16:00