Engineering, 06.05.2021 01:50 asdf334asdf334
A 473 V (line-line), 60 Hz, 3 phase, wye connected, 4 pole induction motor is running at rated voltage, speed, and current. The actual machine speed is 1733 rpm. The stator resistance and leakage reactance can be neglected. When the motor runs at no load, with no core losses, the speed is approximately 1800 rpm with a stator line current of 8 A. The rotor resistance referred to the stator R'r is 0.7 Ohm, and the rotor leakage reactance referred to the stator X'ir is 1.6 Ohm.
(a) What is the frequency of the rotor currents at this operating point?
(b) What is the rated line current?
(c) What is the starting line current if started at full voltage?
(d) What is the rated torque?
Answers: 1
Another question on Engineering
Engineering, 03.07.2019 14:10
Amass of 1.5 kg of air at 120 kpa and 24°c is contained in a gas-tight, frictionless piston-cylinder device. the air is now compressed to a final pressure of 720 kpa. during the process, heat is transferred from the air such that the temperature inside the cylinder remains constant. calculate the boundary work input during this process.
Answers: 2
Engineering, 03.07.2019 15:10
Apiston-cylinder with a volume of 0.25 m3 holds 1 kg of air (r 0.287 k/kgk) at a temperature of 100 c. heat transfer to the cylinder causes an isothermal expansion of the piston until the volume triples. how much heat is added to the piston-cylinder?
Answers: 3
Engineering, 04.07.2019 18:10
Adouble-strand no. 60 roller chain is used to transmit power between a 13-tooth driving sprocket rotating at 300 rev/min and a 52-tooth driven sprocket. a) what is the allowable horsepower of this drive? b) estimate the center-to-center distance if the chain length is 82 pitches. c) estimate the torque and bending force on the driving shaft by the chain if the actual horsepower transmitted is 30 percent less than the corrected (allowable) power.
Answers: 3
Engineering, 04.07.2019 18:10
Give heat transfer applications for the following, (i) gas turbines (propulsion) ) gas turbines (power generation). (iii) steam turbines. (iv) combined heat and power (chp). (v) automotive engines
Answers: 1
You know the right answer?
A 473 V (line-line), 60 Hz, 3 phase, wye connected, 4 pole induction motor is running at rated volta...
Questions
Social Studies, 14.12.2021 02:20
Mathematics, 14.12.2021 02:20
Business, 14.12.2021 02:20
Mathematics, 14.12.2021 02:20
Mathematics, 14.12.2021 02:20
Mathematics, 14.12.2021 02:20
Chemistry, 14.12.2021 02:20
