Engineering, 07.05.2021 16:50 123abc321cbaabc

A cylindrical vessel of diameter D drains through an orifice of diameter DO at the bottom of the vessel. The pressure in the vessel is maintained at atmospheric pressure. Derive an expression for the height of the liquid in the vessel as a function of time, and state your simplifying assumptions. Use the expression you derived to calculate the time at which the height reaches half of its original value or 0.25 m. Also find the height when the time is 20 s. For the second part use the following data: D=5 cm, DO=5 mm, initial height h0=0.5 m

Answers: 2

Show answers

Another question on Engineering

Engineering, 04.07.2019 18:10

Which one from below is not one of the reasons of planning failures? (clo3) a)-planner is careless. b-planner spend less time in the field but more time on the desk c)-planner is not qualified d)-planner does not have sufficient time to properly plan

Answers: 3

Answer

Engineering, 04.07.2019 18:10

True or false (explain) (110)[111] is a slip system in bcc metals . the {111} family in fcc contains 8 planes. resolved shear stress (rss) in single crystals is just related to the applied stress. critical resolved shear stress (crss) in single crystal metals is direct proportional to the number of defects in the structure

Answers: 2

Answer

Engineering, 04.07.2019 19:20

Air at a pressure of 1atm and a temperature of 40 c is in parallel flow over the top surface of a flat plate that is heated to a uniform temperature of 120 c. the plate has a length of 0.40m (in the flow direction) and a width of 0.15m. the reynolds number based on the plate length is 50, 000. what is the rate of heat transfer from the plate to the air? if the free stream velocity of the air is doubled and the pressure is increased to 10 atm what is the rate of heat transfer?

Answers: 2

Answer

Engineering, 06.07.2019 02:30

Define thermoplastic polymers and thermosetting polymers in terms of their structures, and (ii) describe briefly a process suitable for the production of products from each type of polymer.

Answers: 3

Answer

You know the right answer?

A cylindrical vessel of diameter D drains through an orifice of diameter DO at the bottom of the ves...

Questions