subject
Engineering, 11.05.2021 22:10 victory08

A long flat plate is heat treated by suspending it in a tubular furnace with a diameter of 2 m and a wall temperature of 1000 K. If the wall of the furnace and the surfaces of the plate may be approximated as blackbodies and the plate is at an initial temperature of 300 K, what is the net rate of radiation heat transfer per unit length to the plate

ansver
Answers: 2

Another question on Engineering

question
Engineering, 03.07.2019 14:10
Explain the difference laminar and turbulent flow. explain it with the shear stress and the velocity profiles.
Answers: 1
question
Engineering, 04.07.2019 18:10
You are making beer. the first step is filling the glass carboy with the liquid wort. the internal diameter of the carboy is 15 in., and you wish to fill it up to a depth of 2 ft. if your wort is drawn from the kettle using a siphon process that flows at 3 gpm, how long will it take to fill?
Answers: 1
question
Engineering, 04.07.2019 18:20
For a gate width of 2 m into the paper, determine the force required to hold the gate abc at its location.
Answers: 1
question
Engineering, 04.07.2019 18:20
Refrigerant-134a enters the compressor of a refrigerator as superheated vapor at 0.14 mpa and -10°c at a rate of 0.05 ka/s and leaves at 0.8 mpa and 50°c. the refrigerant is cooied in the condenser to 0.72 mpa and 26'c. it is then throttled to 0.15 mpa. sketch the t-s diagram for the system and evaluate: 6) the rate of heat removai from the refrigerated space (kw), it) the power input to the compressor (kw), ii) the isentropic efficiency of the compressor (%), and iv) the cop of the refrigerator.
Answers: 2
You know the right answer?
A long flat plate is heat treated by suspending it in a tubular furnace with a diameter of 2 m and a...
Questions
question
Computers and Technology, 17.07.2019 22:30
question
Social Studies, 17.07.2019 22:30
question
Mathematics, 17.07.2019 22:30
Questions on the website: 13722367