subject
Engineering, 13.05.2021 21:40 Kategaldamez3

Based on the following passage, what was the intended effect of building cities in concentric circles? The first major urban planning trend of the 20th century was Ebenezer Howard's Garden City movement, outlined in his 1902 book
Garden Cities of To-Morrow, in which he envisioned cities designed as a series of concentric circles, with development flanking five
wide, circular roads, each separated by greenbelts. Each circular community could house around 32,000 people and would be connected
to a larger, circular central city and neighboring communities by rail and highways.
O to allow cities to fit in oddly shaped geographic zones
O to allow residents to live in "green" areas away from heavy industry
O to discourage the expensive and time consuming practice of zoning
to isolate the residents of each zone

ansver
Answers: 2

Another question on Engineering

question
Engineering, 04.07.2019 18:10
Thermal stresses are developed in a metal when its a) initial temperature is changed b) final temperature is changed c) density is changed d) thermal deformation is prevented e) expansion is prevented f) contraction is prevented
Answers: 2
question
Engineering, 04.07.2019 18:10
The higher the astm grain size number, the finer the gran is. a)-true b)-false
Answers: 2
question
Engineering, 04.07.2019 18:10
Ahot wire operates at a temperature of 200°c while the air temperature is 20°c. the hot wire element is a tungsten wire of 5 um diameter and 2 mm in length. plot using excel current, heat transfer and heat generated by the wire for air velocity varying from 1-10 m/s in steps of lm/s? matlab the sensor voltage output, resistance, or assume nu 0.989 re033pr13 take air properties at tr (200°c20°c)/2 = 110°c properties of tungsten: c 0.13 kj/kg.k 3 p 19250 kg/m k (thermal conductivity) = 174 w/m.k
Answers: 2
question
Engineering, 04.07.2019 18:10
Aturning operation is performed with following conditions: rake angle of 12°, a feed of 0.35 mm/rev, and a depth of cut of 1.1 mm. the work piece is aluminum alloy 6061 with t6 heat treatment (a16061-t6). the resultant chip thickness was measured to be 1.0 mm. estimate the cutting force, fc. use shear stress of 207 mpa and coefficient of friction on the tool face of 0.6.
Answers: 1
You know the right answer?
Based on the following passage, what was the intended effect of building cities in concentric circle...
Questions
question
Mathematics, 18.10.2020 04:01
question
Chemistry, 18.10.2020 04:01
question
English, 18.10.2020 04:01
Questions on the website: 13722367