In a residence, the control of a room's baseboard electric resistance heating system would be accomplished automatically using a? A. wall-mounted pressure sensor.
B. duct-mounted thermostat.
C. wall-mounted humidity sensor.
D. wall-mounted thermostat.

The mass flow rate of the fluid remains constant in all steady flow process. a)- true b)- false

An air conditioning system consist of a 5 cm diameter pipe, operating at a pressure of 200 kpa. the air initially enters the pipe at 15°c with a velocity of 20 m/s and relative humidity of 80%. if the heat supply throughout the process is 960 w, determine the relative humidity and the temperature at the outlet

Afull journal bearing has a journal diameter of 27 mm, with a unilateral tolerance of -0.028 mm. the bushing bore has a diameter of 27.028 mm and a unilateral tolerance of 0.04 mm. the l/d ratio is 0.5. the load is 1.3 kn and the journal runs at 1200 rev/min. if the average viscosity is 50 mpa-s, find the minimum film thickness, the power loss, and the side flow for the minimum clearance assembly.