Engineering, 15.05.2021 22:10 zamakun

In the brake system shown below, the clockwise couple Mc is applied to the brake drum C. (i) Determine the largest force exerted by the hydraulic cylinder on brake arm AB for which the brake drum will rotate if Mc is 300 Nm a. clockwise b. counterclockwise. The coefficient of static friction between the drum and arm is 0.50. (ii) If the coefficient of kinetic friction between the drum and arm is 0.40 and the hydraulic cylinder pushes end B to the left with a force of 1 kN, determine the friction force acting on the drum when the couple Mc is 300 Nm a. clockwise b. counterclockwise.

Answers: 3

Show answers

Another question on Engineering

Engineering, 04.07.2019 18:20

Asolid cylinder is concentric with a straight pipe. the cylinder is 0.5 m long and has an outside diameter of 8 cm. the pipe has an inside diameter of 8.5 cm. the annulus between the cylinder ad the pipe contains stationary oil. the oil has a specific gravity of 0.92 and a kinematic viscosity of 5.57 x 10-4 m2/s. most nearly, what is the force needed to move the cylinder along the pipe at a constant velocity of 1 m/s?

Answers: 3

Answer

Engineering, 04.07.2019 18:20

Modern high speed trains do not have perpendicular expansion gaps where rails are joined end-to-end any more they are mostly welded together but what might happen if there was a spell of particularly hot weather that causes inspection of the tracks?

Answers: 1

Answer

Engineering, 04.07.2019 19:20

Air enters a horizontal, constant-diameter heating duct operating at steady state at 290 k, 1 bar, with a volumetric flow rate of 0.25 m°/s, and exits at 325 k, 0.95 bar. the flow area is 0.04 m2. assuming the ideal gas model with k = 1.4 for the air, determine (a) the velocity at the inlet and exit, each in m/s, and (c) the rate of heat transfer, in kw flow rate, in kg/s, (b) the mass kg 0.3

Answers: 2

Answer

Engineering, 06.07.2019 03:30

Acubic shaped box has a side length of 1.0 ft and a mass of 10 lbm is sliding on a frictionless horizontal surface towards a 30 upward incline. the horizontal velocity of the box is 20 ft/s. determine how far up the incline the box will travel (report center of mass distance along the inclined surface, not vertical distance)

Answers: 1

Answer

You know the right answer?

In the brake system shown below, the clockwise couple Mc is applied to the brake drum C. (i) Determi...

Questions