subject
Engineering, 16.05.2021 17:00 chrisd2038

A vertical Venturi meter is used to measure flow of oil with specific gravity 0.83. The entrance diameter is 4 cm while throat diameter is 2cm. The
pressure difference between inlet and the throat is 173.68 kN/m². if discharge
of oil is 0.017 m³/s, Calculate the difference height between entrance point and throat of the Venturi meter.
Given Coefficient of discharge, Cd =0.92​

ansver
Answers: 3

Another question on Engineering

question
Engineering, 04.07.2019 18:10
The mass flow rate of the fluid remains constant in all steady flow process. a)- true b)- false
Answers: 1
question
Engineering, 04.07.2019 18:20
Aquick transition of the operating speed of a shaft from its critical speed will whirl amplitude. (a) increase (b) limit (c) not affect (d) zero
Answers: 2
question
Engineering, 04.07.2019 18:20
Describe one experiment in which the glass transition temperature and melting temperature of a totally amorphous thermoplastic material can be determined. show the relevant experimental results in a diagram which should be properly annotated with the two temperatures clearly marked. what is likely to happen to the curve in the diagram if the amorphous polymer is replaced by a thermosetting type?
Answers: 2
question
Engineering, 04.07.2019 19:10
An external consultant recommends that a plant installs a bank of capacitors for power factor correction. this will reduce the peak electrical demand charges by an average of 93 kw every month. the plant current pays $13 per kw in peak demand charges. the capacitor bank will include 223 kw of fixed capacitors, and 183 of variable capacitors. the fixed capacitors cost $59 per kw, and the variable capacitors will cost $65 per kw. the consultant charges 21% of the equipment costs to install the capacitors. because this project will reduce the demand for the electric utility, they are prepared to provide a one-time rebate of $42 per kw of reduced demand. what is the simple payback period for this project (in years)?
Answers: 2
You know the right answer?
A vertical Venturi meter is used to measure flow of oil with specific gravity 0.83. The entrance di...
Questions
question
Advanced Placement (AP), 16.10.2020 05:01
question
Mathematics, 16.10.2020 05:01
question
Physics, 16.10.2020 05:01
Questions on the website: 13722359