Engineering, 17.05.2021 17:50 JellalFernandes
1. A wedge is inserted into the groove and a force is applied from above. Will the shape (proportion) of the wedge make a difference in its effectiveness?
Answers: 3
Engineering, 03.07.2019 14:10
If the thermal strain developed in polyimide film during deposition is given as 0.0044. assume room temperature is kept at 17.3 c, and thermal coefficient of expansion for the film and the substrate are 54 x 10^-6c^-1 and 3.3 x 10^-6c^-1respectively. calculate the deposition temperature.
Answers: 3
Engineering, 04.07.2019 19:10
What is a monomer? how do they form a ploymer from the view point of chemical bonding?
Answers: 1
Engineering, 04.07.2019 19:10
With increases in magnification, which of the following occur? a. the field of view decreases. b. the ambient illumination decreases. c. the larger parts can be measured. d. the eyepiece must be raised.
Answers: 1
Engineering, 04.07.2019 19:20
Apiping systems consists of 6 m of 6-std type k and 12 m of 4-std type k, both drawn copper tubing. the system conveys ethylene glycol at a rate of 0.013 m3/s. the pressure drop across the system is to be calculated. there are two 90° elbows in the 6-in pipe, a reduction from the 6-in pipe to the 4-in pipe and four 90° elbows in the 4-in pipe. all fittings are soldered (same as flanged) and regular. the inlet and outlet of the system are at the same height.
Answers: 1
1. A wedge is inserted into the groove and a force is applied from above. Will the shape (proportion...
Mathematics, 25.06.2019 16:20
Mathematics, 25.06.2019 16:20
Arts, 25.06.2019 16:20
Chemistry, 25.06.2019 16:20
Social Studies, 25.06.2019 16:20
Mathematics, 25.06.2019 16:20