subject
Engineering, 18.05.2021 18:30 jalonjonrs5586

Write a QBasic program to sort aphetically the number of student names, each student name has first and last name like "Ahmed Yousef". The program should print the names before and after sorting. Also, the program should use "eod" as the last record in the file. The program should consider the upper and lower case for the names. 1. The first sorting should be based on the first name "Ahmed". Note that, the first names of two students may have the same first character and in this case, the sorting should be considered based on the second character of the first names of two students. 2. The second sorting should be based on the last name "Yousef". Note that, the last names of two students may have the same first character and in this case, the sorting should be considered based on the second character of the last names of two students

ansver
Answers: 2

Another question on Engineering

question
Engineering, 04.07.2019 18:10
Water at 70°f and streams enter the mixing chamber at the same mass flow rate, determine the temperature and the quality of the exiting stream. 0 psia is heated in a chamber by mixing it with saturated water vapor at 20 psia. if both streams enters the mixing chamber at the same mass flow rate, determine the temperature and the quality of the existing system.
Answers: 2
question
Engineering, 04.07.2019 18:10
Asingle-geared blanking press has a stroke of 200 mm and a rated capacity of 320 kn. a cam driven ram is assumed to be capable of delivering the full press load at constant force during the last 15 percent of a constant-velocity stroke. the camshaft has an average speed of 90 rev/min and is geared to the flywheel shaft at a 6: 1 ratio. the total work done is to include an allowance of 16 percent for friction a) estimate the maximum energy fluctuation b) find the rim weight for an effective diameter of 1.2 m and a coefficient of speed fluctuation of 0.10
Answers: 1
question
Engineering, 04.07.2019 18:10
Aplate clutch has a single pair of mating friction surfaces 250-mm od by 175-mm id. the mean value of the coefficient of friction is 0.30, and the actuating force is 4 kn. a) find the maximum pressure and the torque capacity using the uniform-wear model. b) find the maximum pressure and the torque capacity using the uniform-pressure model.
Answers: 3
question
Engineering, 04.07.2019 18:10
The flow rate of air through a through a pipe is 0.02 m5/s. a pitot static tube is placed in the flow. the radius of the pitot static tube is 1 mm. assuming the flow to be steady and the air to be at 300k, calculate the difference in total and static pressure if the diameter of the pipe is: (a) d 0.1 m d 0.05 m (c) d 0.01 m
Answers: 2
You know the right answer?
Write a QBasic program to sort aphetically the number of student names, each student name has first...
Questions
question
History, 26.03.2020 22:10
question
Biology, 26.03.2020 22:10
question
Mathematics, 26.03.2020 22:10
Questions on the website: 13722363