A second specimen of the same normally consolidated clay was consolidated in the triaxial cell under the same confining stress of 150 kPa. However, the specimen was then sheared using drained conditions in axial compression (CD test). Determine the deviatoric stress at failure that should be obtained in this second test. Indicate your answer below [Units: kPa] :

If the thermal strain developed in polyimide film during deposition is given as 0.0044. assume room temperature is kept at 17.3 c, and thermal coefficient of expansion for the film and the substrate are 54 x 10^-6c^-1 and 3.3 x 10^-6c^-1respectively. calculate the deposition temperature.

On a average work day more than work place firs are reorted

Adouble-strand no. 60 roller chain is used to transmit power between a 13-tooth driving sprocket rotating at 300 rev/min and a 52-tooth driven sprocket. a) what is the allowable horsepower of this drive? b) estimate the center-to-center distance if the chain length is 82 pitches. c) estimate the torque and bending force on the driving shaft by the chain if the actual horsepower transmitted is 30 percent less than the corrected (allowable) power.