Question One:
A bullding is of 38.4m high and has plan dimensions 12.6m * 10m.
(a) Zone the ve...
Engineering, 18.05.2021 22:30 ella3714
Question One:
A bullding is of 38.4m high and has plan dimensions 12.6m * 10m.
(a) Zone the vertical wall subjected to wind pressure, considering the breadth 'b' of the building
perpendicular to the wind direction as 12.6m, showing reference height 'z' to be taken at
different elevations. The total number of zones shall be restricted to four. Middle two
zones shall be of equal height.
Answers: 3
Engineering, 03.07.2019 14:10
The y form of iron is known as: a) ferrite b) cementite c) perlite d) austenite
Answers: 3
Engineering, 04.07.2019 18:10
Abrake has a normal braking torque of 2.8 kip in and heat-dissipating cast-iron surfaces whose mass is 40 lbm. suppose a load is brought to rest in 8.0 s from an initial angular speed of 1600 rev/min using the normal braking torque; estimate the temperature rise of the heat dissipating surfaces.
Answers: 3
Engineering, 04.07.2019 18:20
Find the minimum film thickness for a journal bearing with the data below. shaft diameter, d-50 mm, clearance ratio, cdratio? 0.001, shaft speed, n 2000 rpm; bearing length. i 200 mm; eccentricity ration, ? -0.55. ( note, cdratio-ca/d) the minimum film thickness is um
Answers: 2
Mathematics, 28.01.2020 02:31
Social Studies, 28.01.2020 02:31
Mathematics, 28.01.2020 02:31
Social Studies, 28.01.2020 02:31
Mathematics, 28.01.2020 02:31
Advanced Placement (AP), 28.01.2020 02:31
Mathematics, 28.01.2020 02:31
Mathematics, 28.01.2020 02:31
English, 28.01.2020 02:31