subject
Engineering, 21.05.2021 05:30 lesly0913

1) Una espira circular hecha de material conductor elástico estirado tiene un radio de 1.23 m. Se pone en un plano formando ángulos rectos con un campo magnético uniforme de 785 mT. Cuando se suelta, su radio empieza a disminuir a una velocidad instantánea de 7.50 cm/s. Calcule la fuerza electromotriz inducida en la espira en ese momento. 2) En 1929, por primera vez, M. R. Van Cauwenberghe logró medir por vez primera directamente la corriente de desplazamiento id entre las placas de un capacitor de placas paralelas al que se aplicaba una diferencia de potencial alterna, según se indica en la figura. Utilizó placas circulares cuyo radio efectivo medía 40.0 cm y cuya capacitancia era de 100 pF. La diferencia de potencial tenía un valor máximo de ΔVm de 174 kV a una frecuencia de 50.0 Hz. a) ¿Cuál era la corriente máxima de desplazamiento entre las placas? b) ¿Por qué era tan grande la diferencia de potencial aplicada que se escogió?

ansver
Answers: 2

Another question on Engineering

question
Engineering, 04.07.2019 18:20
An open feedwater heater operates at steady state with liquid entering at inlet 1 with t? = 40°c and pl = 1 .2 mpa. water vapor att2-200°c and p2 = 1.2 mpa enters at inlet 2. saturated liquid water exits with a pressure of pa 1.2 mpa. neglect heat transfer with the surroundings and all kinetic and potential energy effects, determine the mass flow rate of steam at inlet 2 if the mass flow rate of liquid water at inlet 1 is given as 2 kg/s.
Answers: 3
question
Engineering, 04.07.2019 18:20
Aheavily insulated piston-cylinder device contains 0.02 m3 of steam at 300 kpa and 200 °c. 1.2 mpa. d this process. team is now compressed in a reversible manner to a pressure of etermine the entropy change and the work done on the steam during this process
Answers: 1
question
Engineering, 06.07.2019 03:10
List and describe in sequence the operation process steps for boxf machine?
Answers: 1
question
Engineering, 06.07.2019 04:20
Consider a spherical container of inner radius , outer radius r2, and thermal conductivity k. express the boundary condition on the inner surface of the container for steady one-dimensional conduction for the following cases: (a) specified temperature of 50°c, (b) specified heat flux of 30 w/m2 toward the center, (c) convection to a medium at t with a heat transfer coefficient of h
Answers: 2
You know the right answer?
1) Una espira circular hecha de material conductor elástico estirado tiene un radio de 1.23 m. Se po...
Questions
Questions on the website: 13722367