Engineering, 21.05.2021 18:50 Sawyer4648
If the variable step is set to equal 5 and then the code reads step = step + 2, what will step now equal?
0
2
5
7
can someone actually help instead of taking points please
Answers: 2
Engineering, 04.07.2019 03:10
What precautions should you take to prevent injuries when dealing with heavy loads?
Answers: 1
Engineering, 04.07.2019 16:10
The force on a cutting tool are 2600n vertically downward and 2100 horizontal. determine the resultant force acting on the tool and the angle at which it acts.
Answers: 1
Engineering, 04.07.2019 18:10
Give heat transfer applications for the following, (i) gas turbines (propulsion) ) gas turbines (power generation). (iii) steam turbines. (iv) combined heat and power (chp). (v) automotive engines
Answers: 1
Engineering, 04.07.2019 18:10
Aturning operation is performed with following conditions: rake angle of 12°, a feed of 0.35 mm/rev, and a depth of cut of 1.1 mm. the work piece is aluminum alloy 6061 with t6 heat treatment (a16061-t6). the resultant chip thickness was measured to be 1.0 mm. estimate the cutting force, fc. use shear stress of 207 mpa and coefficient of friction on the tool face of 0.6.
Answers: 1
If the variable step is set to equal 5 and then the code reads step = step + 2, what will step now e...
Computers and Technology, 30.10.2020 22:30
History, 30.10.2020 22:30
Mathematics, 30.10.2020 22:30
Mathematics, 30.10.2020 22:30
Mathematics, 30.10.2020 22:30
Mathematics, 30.10.2020 22:30
Mathematics, 30.10.2020 22:30
Mathematics, 30.10.2020 22:30
Mathematics, 30.10.2020 22:30
Mathematics, 30.10.2020 22:30
Mathematics, 30.10.2020 22:30
English, 30.10.2020 22:30