Engineering, 23.05.2021 21:40 katlynnschmolke

An ideal Otto cycle has a compression ratio of 7. At the beginning of the compression process, P1 = 90 kPa, T1 = 27°C, and V1 = 0.004 m3. The maximum cycle temperature is 1127°C. For each repetition of the cycle, calculate the heat rejection and the net work production. Also calculate the thermal efficiency and mean effective pressure for this cycle. Use constant specific heats at room temperature.

Answers: 2

Show answers

Answers

Answer from: angel13sigala

i) Heat rejection = 1.0288 KJ

Network production = 1.212 kJ

ii) Thermal efficiency = 54.08%

mean effective pressure = 353.5 kPa

Explanation:

Given data :

Compression ratio ( r ) = 7

P1 ( initial pressure ) = 90 kPa,

T1 ( initial temperature ) = 27°C + 273 = 300 K

V1 = 0.004 m^3

Max cycle Temperature = 1127°C for each repetition of the cycle

i) Determine the heat rejection and net work production

considering that process 1-2 is an Isentropic compression

Find ; T2 = T1 ( r )^1.4-1

T2 = 300 ( 7 )^0.4 = 653.371 K

P2 = P1( r )^k

= 90 ( 7 )^1.4 = 1372.081 kPa

considering that process 3-4 is an Isentropic expansion

T4 = T3 / r^k-1

= 1400 / 7^(1.4 -1 ) = 642.82 K

Next ; Calculate the value of m

m = P1V1 / RT1 = 90(0.004) / 0.287 ( 300 )

m = 4.18 * 10^-3 kg

Finally :

amount of heat rejected = mCv ( T4 - T1 )

= 4.18 * 10^-3 ( 0.718 ) ( 642.82 - 300 )

Qout = 1.0288 KJ

amount of heat added ( Qin ) = mCv ( T3 - T2 )

= 4.18 * 10^-3 ( 0.718 ) ( 1400 - 653.371 )

hence Qin = 2.2408 kJ

Network production( Wnet) = Qin - Qout

= 2.2408 - 1.0288 ) KJ

= 1.212 kJ

ii) Determine the thermal efficiency and mean effective pressure of the cycle

Thermal efficiency = 1 - Qout / Qin

= 1 - ( 1.0288 / 2.2408 ) = 54.08%

mean effective pressure = Wnet / V1 ( 1 - 1/r )

= 1.212 / 0.004 ( 1 - 1/7 )

= 353.5 kPa

Answer from: Quest

answer:

no it cand because im gae and so is urmo

explanation:

i need points bih

Answer from: Quest

you the tophh

Explanation:

Another question on Engineering

Engineering, 04.07.2019 18:10

Abrake has a normal braking torque of 2.8 kip in and heat-dissipating cast-iron surfaces whose mass is 40 lbm. suppose a load is brought to rest in 8.0 s from an initial angular speed of 1600 rev/min using the normal braking torque; estimate the temperature rise of the heat dissipating surfaces.

Answers: 3

Answer

Engineering, 04.07.2019 18:10

Adouble-strand no. 60 roller chain is used to transmit power between a 13-tooth driving sprocket rotating at 300 rev/min and a 52-tooth driven sprocket. a) what is the allowable horsepower of this drive? b) estimate the center-to-center distance if the chain length is 82 pitches. c) estimate the torque and bending force on the driving shaft by the chain if the actual horsepower transmitted is 30 percent less than the corrected (allowable) power.

Answers: 3

Answer

Engineering, 04.07.2019 18:10

Shafts are machine elements that are used to a) carry axial loads b) direct shear loads c) transmit power d) rotate at constant speed e) none of the above circular and square shafts subjected to the same torque under the same circum behave a) the same way b) almost the same way

Answers: 2

Answer

Engineering, 04.07.2019 18:10

A-mn has a cubic structure with a0 0.8931 nm and a density of 7.47 g/cm3. b-mn has a different cubic structure, with a0 0.6326 nm and a density of 7.26 g/cm3. the atomic weight of manganese is 54.938 g/mol and the atomic radius is 0.112 nm. determine the percent volume change that would occur if a-mn transforms to b-mn.

Answers: 2

Answer

You know the right answer?

An ideal Otto cycle has a compression ratio of 7. At the beginning of the compression process, P1 =...

Questions