Engineering, 25.05.2021 01:00 ceceallen2003
Ammonia enters a control volume operating at steady state at p1 = 16 bar, T1 = 328 0C, with a mass flow rate of 1.5 kg/s. Saturated vapor at 6 bar leaves through one exit and saturated liquid at 6 bar leaves through a second exit with a volumetric flow rate of 0.10 m3/min. Determine:
(a) the minimum diameter of the inlet pipe, in cm, so the ammonia velocity at the inlet does not exceed 18 m/s.
(b) the volumetric flow rate of the exiting saturated vapor, in m^3/min.
Answers: 3
Engineering, 04.07.2019 18:10
Afluid flows with a velocity field given by v=(x/t)i.. determine the local and convective accelerations when x=3 and t=1.
Answers: 2
Engineering, 04.07.2019 18:10
Which of the following refers to refers to how well the control system responds to sudden changes in the system. a)-transient regulation b)- distributed regulation c)-constant regulation d)-steady-state regulation
Answers: 1
Engineering, 04.07.2019 19:10
When subject to a steady load (within elastic range) over a long period of time, what is the major difference in material behavoir between steel and plastic?
Answers: 2
Engineering, 04.07.2019 19:10
What is the chief metrological difference between measuring with a microscope and with an electronic comparator? a. the microscope is limited to small workpieces.a. the microscope is limited to small workpieces. c. the comparator can only examine one point on the workpiece. d. the microscope carries its own standard.
Answers: 1
Ammonia enters a control volume operating at steady state at p1 = 16 bar, T1 = 328 0C, with a mass f...
History, 01.12.2020 01:50
Mathematics, 01.12.2020 01:50
English, 01.12.2020 01:50
Computers and Technology, 01.12.2020 01:50
Social Studies, 01.12.2020 01:50
History, 01.12.2020 01:50
Mathematics, 01.12.2020 01:50
Mathematics, 01.12.2020 01:50
Mathematics, 01.12.2020 01:50