Engineering, 31.05.2021 14:00 noreenhussain

The given plan below shows a 2-way floor system carried by 1-story 2-bays frame system as shown in sec 1-1. The floor is 18 cm in thickness and made with reinforced concrete with fc`= 28MPa and fy= 420MPa, γc= 24kN/m3 . The floor is to carry a service live load of 5 kN/m2 . Assume that E is constant for all structural elements in the system. Determine the following: 1- Extract he structural system of beam ADG, beam BEH , frame ABC, and frame DEF, showing the loads to be carried on each element from the slab, and include the own weight of the element given that beams ADG and BEH have a section of 180mm in depth and 400 mm in width. Where the girder of all frames has a cross section of 300 mm in depth and 800mm in width. 2- Analyze beam ADG using slope- deflection equations method. 3- Analyze beam BEH using moment distribution method. 4- Analyze frame ABC using moment distribution method

Answers: 2

Show answers

Another question on Engineering

Engineering, 04.07.2019 18:10

Afour cylinder four-stroke in-line engine has a stroke of 160mm, connecting rod length of 150mm, a reciprocating mass of 3kg and its firing order is 1-3-4-2. the spacing between cylinders is 100mm. i. show that the engine is in balance with regard to the primary inertia forces and primary 3. a and secondary inertia couples. li determine the out of balance secondary inertia force ii. propose ways of balancing this out of balance force and discuss the challenges that will arise

Answers: 3

Answer

Engineering, 04.07.2019 18:10

Atmospheric air has a temperature (dry bulb) of 80° f and a wet bulb temperature of 60° f when the barometric pressure is 14.696 psia. determine the specific humidity, grains/lb dry air. a. 11.4 c. 55.8 d. 22.5 b. 44.1

Answers: 1

Answer

Engineering, 04.07.2019 18:20

Derive the correction factor formula for conical nozzle i=-(1+ cosa) and calculate the nozzle angle correction factor for a nozzle whose divergence hal-fangle is 13 (hint: assume that all the mass flow originates at the apex of the cone.

Answers: 3

Answer

Engineering, 04.07.2019 19:10

Abarometer contains mercury with a density of 13600 kg/m3. atmospheric conditions are 95.8 kpa and 20 °c at 20 °c, the vapor pressure of the mercury is 0.000173 kpa. the column of mercury will rise to a height of most nearly. select one: a)- 0.38 m b)- 0.82 m c)- 0.48 m d)- 0.72 m

Answers: 1

Answer

You know the right answer?

The given plan below shows a 2-way floor system carried by 1-story 2-bays frame system as shown in s...

Questions