Engineering, 31.05.2021 14:00 alexis3060
experiment, 2.44mW of incident 520 nm light is directed through a1 cm sample cuvette and 0.68 mW of Plight exits the sample what is the absorbance of the sample
Answers: 2
Engineering, 04.07.2019 18:10
Afluid flows with a velocity field given by v=(x/t)i.. determine the local and convective accelerations when x=3 and t=1.
Answers: 2
Engineering, 04.07.2019 18:10
Afull journal bearing has a journal diameter of 27 mm, with a unilateral tolerance of -0.028 mm. the bushing bore has a diameter of 27.028 mm and a unilateral tolerance of 0.04 mm. the l/d ratio is 0.5. the load is 1.3 kn and the journal runs at 1200 rev/min. if the average viscosity is 50 mpa-s, find the minimum film thickness, the power loss, and the side flow for the minimum clearance assembly.
Answers: 1
Engineering, 04.07.2019 18:10
Condition monitoring is a major component of. (clo4) a)- predictive maintenance. b)-preventive maintenance c)-proactive maintenance d)-reactive maintenance.
Answers: 1
Engineering, 04.07.2019 18:20
Steam enters a converging nozzle at 3.0 mpa and 500°c with a at 1.8 mpa. for a nozzle exit area of 32 cm2, determine the exit velocity, mass flow rate, and exit mach number if the nozzle: negligible velocity, and it exits (a) is isentropic (b) has an efficiency of 94 percent
Answers: 2
experiment, 2.44mW of incident 520 nm light is directed through a1 cm sample cuvette and 0.68 mW of...
Mathematics, 14.12.2020 21:30
Mathematics, 14.12.2020 21:30
Mathematics, 14.12.2020 21:30
Geography, 14.12.2020 21:30
Mathematics, 14.12.2020 21:30
Mathematics, 14.12.2020 21:30
Mathematics, 14.12.2020 21:30
Advanced Placement (AP), 14.12.2020 21:30