Engineering, 31.05.2021 23:20 bestkitty2588

STRUCTURAL ANALYSIS II The given plan below shows a 2-way floor system carried by 1-story 2-bays frame system as shown in
sec 1-1. The floor is 18 cm in thickness and made with reinforced concrete with fc`= 28MPa and fy=
420MPa, γc= 24kN/m3 . The floor is to carry a service live load of 5 kN/m2 . Assume that E is constant
for all structural elements in the system. Determine the following: 1- Extract he structural system of
beam ADG, beam BEH , frame ABC, and frame DEF, showing the loads to be carried on each element
from the slab, and include the own weight of the element given that beams ADG and BEH have a section
of 180mm in depth and 400 mm in width. Where the girder of all frames has a cross section of 300 mm
in depth and 800mm in width. 2- Analyze beam ADG using slope- deflection equations method. 3-
Analyze beam BEH using moment distribution method. 4- Analyze frame ABC using moment distribution
method

Answers: 3

Show answers

Another question on Engineering

Engineering, 03.07.2019 14:10

When at a point two solid phase changes to one solid phase on cooling then it is known as a) eutectoid point b) eutectic point c) peritectic point d) peritectoid point

Answers: 3

Answer

Engineering, 04.07.2019 18:10

Refrigerant 134a enters an insulated compressor operating at steady state as saturated vapor at -26°c with a volumetric flow rate of 0.18 m3/s. refrigerant exits at 9 bar, 70°c. changes in kinetic and potential energy from inlet to exit can be ignored. determine the volumetric flow rate at the exit, in m3/s, and the compressor power, in kw.

Answers: 1

Answer

Engineering, 04.07.2019 18:10

Air is to be cooled in the evaporator section of a refrigerator by passing it over a bank of 0.8-cm-outer-diameter and 0.4-m-long tubes inside which the refrigerant is evaporating at -20°c. air approaches the tube bank in the normal direction at 0°c and 1 atm with a mean velocity of 4 m/s. the tubes are arranged in-line with longitudinal and transverse pitches of sl- st 1.5 cm. there are 30 rows in the flow direction with 15 tubes in each row. determine (a) the refrigeration capacity of this system and (b) pressure drop across the tube bank. evaluate the air properties at an assumed mean temperature of -5°c and 1 atm. is this a good assumption?

Answers: 1

Answer

Engineering, 04.07.2019 18:20

Asolid cylinder is concentric with a straight pipe. the cylinder is 0.5 m long and has an outside diameter of 8 cm. the pipe has an inside diameter of 8.5 cm. the annulus between the cylinder ad the pipe contains stationary oil. the oil has a specific gravity of 0.92 and a kinematic viscosity of 5.57 x 10-4 m2/s. most nearly, what is the force needed to move the cylinder along the pipe at a constant velocity of 1 m/s?

Answers: 3

Answer

You know the right answer?

STRUCTURAL ANALYSIS II The given plan below shows a 2-way floor system carried by 1-story 2-bays fr...

Questions