Engineering, 02.06.2021 18:20 aliami0306oyaj0n

Which option identifies what Steven should use during the process in the following scenario and correctly explains why? Steven is conducting a life cycle inventory of all of the energy and raw materials used in every stage of the production of an
eco-friendly home. It is important that this is done correctly since the impact analysis evaluates the effects of the product on
the environment, and also on human health, based upon the product's energy and raw material input and output.
O Estimated numbers should be used so that calculations can be as simple as possible.
O Exact numbers should be used, but calculations can be rounded to the nearest estimate
O Estimated numbers should be used so that calculations can be as variable as possible,
O Exact numbers should be used so that calculations can be as precise as possible

Answers: 1

Show answers

Another question on Engineering

Engineering, 04.07.2019 18:10

Asingle-geared blanking press has a stroke of 200 mm and a rated capacity of 320 kn. a cam driven ram is assumed to be capable of delivering the full press load at constant force during the last 15 percent of a constant-velocity stroke. the camshaft has an average speed of 90 rev/min and is geared to the flywheel shaft at a 6: 1 ratio. the total work done is to include an allowance of 16 percent for friction a) estimate the maximum energy fluctuation b) find the rim weight for an effective diameter of 1.2 m and a coefficient of speed fluctuation of 0.10

Answers: 1

Answer

Engineering, 04.07.2019 18:10

Determine whether or not it is possible to compress air adiabatically from k to 140 kpa and 400 k. what is the entropy change during this process?

Answers: 3

Answer

Engineering, 04.07.2019 18:10

Thermal stresses are developed in a metal when its a) initial temperature is changed b) final temperature is changed c) density is changed d) thermal deformation is prevented e) expansion is prevented f) contraction is prevented

Answers: 2

Answer

Engineering, 04.07.2019 18:20

Find the kinematic pressure of 160kpa. for air, r-287 j/ kg k. and hair al viscosity of air at a temperature of 50°c and an absolute (10 points) (b) find the dynamic viscosity of air at 110 °c. sutherland constant for air is 111k

Answers: 3

Answer

You know the right answer?

Which option identifies what Steven should use during the process in the following scenario and corr...

Questions