Make a list of technical education
institute in Nepal and describe the program of anyone....
![subject](/tpl/images/cats/User.png)
Engineering, 04.06.2021 14:00 nancyrj3824
Make a list of technical education
institute in Nepal and describe the program of anyone.
![ansver](/tpl/images/cats/User.png)
Answers: 1
Another question on Engineering
![question](/tpl/images/cats/User.png)
Engineering, 04.07.2019 18:10
An air conditioning system consist of a 5 cm diameter pipe, operating at a pressure of 200 kpa. the air initially enters the pipe at 15°c with a velocity of 20 m/s and relative humidity of 80%. if the heat supply throughout the process is 960 w, determine the relative humidity and the temperature at the outlet
Answers: 3
![question](/tpl/images/cats/User.png)
Engineering, 04.07.2019 18:10
The filament of an incandescent lamp has a temperature of 2000k. calculate the fraction of radiation emitted in the visible light band if the filament is approximated as blackbody
Answers: 2
![question](/tpl/images/cats/User.png)
Engineering, 04.07.2019 18:10
Awall of 0.5m thickness is to be constructed from a material which has average thermal conductivity of 1.4 w/mk. the wall is to be insulated with a material having an average thermal conductivity of 0.35 w/mk so that heat loss per square meter shall not exceed 1450 w. assume inner wall surface temperature of 1200°c and outer surface temperature of the insulation to be 15°c. calculate the thickness of insulation required.
Answers: 3
![question](/tpl/images/cats/User.png)
Engineering, 04.07.2019 18:10
Aturning operation is performed with following conditions: rake angle of 12°, a feed of 0.35 mm/rev, and a depth of cut of 1.1 mm. the work piece is aluminum alloy 6061 with t6 heat treatment (a16061-t6). the resultant chip thickness was measured to be 1.0 mm. estimate the cutting force, fc. use shear stress of 207 mpa and coefficient of friction on the tool face of 0.6.
Answers: 1
You know the right answer?
Questions
![question](/tpl/images/cats/mat.png)
Mathematics, 09.12.2021 02:30
![question](/tpl/images/cats/mat.png)
![question](/tpl/images/cats/ekonomika.png)
![question](/tpl/images/cats/ekonomika.png)
![question](/tpl/images/cats/obshestvoznanie.png)
Social Studies, 09.12.2021 02:30
![question](/tpl/images/cats/mat.png)
![question](/tpl/images/cats/fizika.png)
Physics, 09.12.2021 02:30
![question](/tpl/images/cats/fizika.png)
![question](/tpl/images/cats/himiya.png)
![question](/tpl/images/cats/ekonomika.png)
![question](/tpl/images/cats/informatica.png)
Computers and Technology, 09.12.2021 02:30
![question](/tpl/images/cats/User.png)
SAT, 09.12.2021 02:30
![question](/tpl/images/cats/fizika.png)
![question](/tpl/images/cats/ekonomika.png)
![question](/tpl/images/cats/biologiya.png)
![question](/tpl/images/cats/informatica.png)
Computers and Technology, 09.12.2021 02:30
![question](/tpl/images/cats/mat.png)
![question](/tpl/images/cats/User.png)
![question](/tpl/images/cats/User.png)
SAT, 09.12.2021 02:30