Engineering, 05.06.2021 06:20 nicoleamor

Setout is required to start excavation of a new incline. To start it is necessary to calculate the intersection points on the centreline of two existing parallel drives, A and
B. You have two existing stations located on the centreline of the existing drives with
the co-ordinates shown below.
BS250 in A
Easting
1130.271
Northing
6178.452
RL
2061.666
BS451 in B
Easting
1378.44
Northing
6147.16
RL
2022.5
The centreline of drive A has a bearing of 45°10' and a grade of -1:150 in that
direction. The centreline of drive B has a bearing of 45°10' and a grade of 1:75 in that
direction.
The new incline has a bearing of 357°21'. These are shown in the figure below.
Calculate the three dimensional co-ordinates for the centreline intersection points that
give a grade for the incline of 1:8.

Answers: 3

Show answers

Another question on Engineering

Engineering, 04.07.2019 18:10

Ajournal bearing has a journal diameter of 3.250 in with a unilateral tolerance of 20.003 in. the bushing bore has a diameter of 3.256 in and a unilateral tolerance of 0.004 in. the bushing is 2.8 in long and supports a 700-lbf load. the journal speed is 900 rev/min. find the minimum oil film thickness and the maximum film pressure for both sae 20 and sae 20w-30 lubricants, for the tightest assembly if the operating film temperature is 160°f. a computer code is appropriate for solving this problem.

Answers: 3

Answer

Engineering, 04.07.2019 18:10

The filament of an incandescent lamp has a temperature of 2000k. calculate the fraction of radiation emitted in the visible light band if the filament is approximated as blackbody

Answers: 2

Answer

Engineering, 04.07.2019 18:10

Consider a large isothermal enclosure that is maintained at a uniform temperature of 2000 k. calculate the emissive power of the radiation that emerges from a small aperture on the enclosure surface. what is the wavelength ? , below which 10% of the emission is concentrated? what is the wavelength ? 2 above which 10% of the emission is concentrated? determine the wavelength at which maximum spectral emissive power occurs. what is the irradiation incident on a small object placed inside the enclosure?

Answers: 2

Answer

Engineering, 04.07.2019 18:10

At 12 noon, the count in a bacteria culture was 400; at 4: 00 pm the count was 1200 let p(t) denote the bacteria cou population growth law. find: (a) an expression for the bacteria count at any time t (b) the bacteria count at 10 am. (c) the time required for the bacteria count to reach 1800.

Answers: 1

Answer

You know the right answer?

Setout is required to start excavation of a new incline. To start it is necessary to calculate the...

Questions