subject
Engineering, 05.06.2021 06:40 elijahjacksonrp6z2o7

At an underground coal mine a development heading for a longwall panel has intercepted a fault. The last surveyed station in the roof of the seam was found to
have co-ordinates of E 2788.86, N 5222.92 and RL 2674.00. The seam is very
regular to the west of the surveyed station with a rate of true dip of 4°20'
descending in the direction of 125°20'35". A vertical borehole was drilled at E
3402.76, N 5292.97 and the top of the seam was found to be RL 2658.31.
Calculate the displacement caused by the fault.​

ansver
Answers: 1

Another question on Engineering

question
Engineering, 03.07.2019 23:20
Two technicians are discussing the intake air temperature (iat) sensor. technician a says that the computer uses the iat sensor as a backup to the engine coolant temperature (ect) sensor. technician b says that the powertrain control module (pcm) will subtract the calculated amount of fuel if the air measures hot. who is correct
Answers: 3
question
Engineering, 04.07.2019 18:10
Steel is coated with a thin layer of ceramic to protect against corrosion. what do you expect to happen to the coating when the temperature of the steel is increased significantly? explain.
Answers: 1
question
Engineering, 04.07.2019 18:10
Water at 70°f and streams enter the mixing chamber at the same mass flow rate, determine the temperature and the quality of the exiting stream. 0 psia is heated in a chamber by mixing it with saturated water vapor at 20 psia. if both streams enters the mixing chamber at the same mass flow rate, determine the temperature and the quality of the existing system.
Answers: 2
question
Engineering, 04.07.2019 18:10
Adouble-strand no. 60 roller chain is used to transmit power between a 13-tooth driving sprocket rotating at 300 rev/min and a 52-tooth driven sprocket. a) what is the allowable horsepower of this drive? b) estimate the center-to-center distance if the chain length is 82 pitches. c) estimate the torque and bending force on the driving shaft by the chain if the actual horsepower transmitted is 30 percent less than the corrected (allowable) power.
Answers: 3
You know the right answer?
At an underground coal mine a development heading for a longwall panel has intercepted a fault. The...
Questions
question
History, 20.09.2020 17:01
question
English, 20.09.2020 17:01
question
Mathematics, 20.09.2020 17:01
Questions on the website: 13722367