) The slab shown below is loaded with D = 8 kN/m2 and L= 4 kN/m2
. All beams are 300
mm in width and 600 mm in depth and all columns are square with side length of 300
mm. If the slab is 200 mm thick and is reinforced with 10 mm diameter bars in both
directions, then:
(a)Calculate the design moment of the slab at A.
(b)Calculate the uniformly distributed load on beam B1.​

A3-mm-thick panel of aluminum alloy (k 177 w/m-k, c 875 j/kg-k and ? = 2770 kg/m) is finished on both sides with an epoxy coating that must be cured at or above t,-150°c for at least 5 min. the production line for the curing operation involves two steps: (1) heating in a large oven with air at ts,0-175°c and a convection coefficient of h, 40 w/m2. k, and (2) cooling in a large chamber with air at 25°c and a con- vection coefficient of he 10 w/m2.k. the heating portion of the process is conducted over a time interval te which exceeds the ime required to reach 150°c by 5 min (h = r + 300 s). the coating has an emissivity of ? = 0.8, and the temperatures of the oven and chamber walls are 175 and 25°c, respectively. if the panel is placed in the oven at an initial temperature of 25°c and removed from the chamber at a safe-to-touch tempera ture of 37°c, what is the total elapsed time for the two-step curing operation?