Please help me answer the following questions by watching an engineering video and answering the questions in complete sentences as you go. Video: What does an environmental engineer do? - Careers in Science and Engineering by National Science Foundation

Questions:

Based on the video, what kind of locations do Environmental Engineers work? Offices, laboratory etc

How many hours a week does an Environmental Engineer work? If they are working 5 days a week, how many hours is that per day?

What kinds of school subjects do you need to practice to be an Environmental Engineer?

What level of school do you need to reach to be an Environmental Engineer?
Bonus: How many more years of school would you need to reach that?

Outside Research: What is an environmental issue that affects Los Angeles? Why is that a bad thing? Is there anything you can do to help?

Apipe with an outside diameter of 15 cm is exposed to an ambient air and surrounding temperature of -20°c. the pipe has an outer surface temperature of 65°c and an emissivity of 0.85. if the rate of heat loss from the pipe surface is 0.95 kw per meter of length, the external convective heat transfer coefficient (h) is: (a) 12.5 w/m"k (b) 18.6 w/mk (c) 23.7 w/mk (d) 27.9 w/mk (e) 33.5 w/mk

The higher the astm grain size number, the finer the gran is. a)-true b)-false

Ashielded metal arc-welding operation is accomplished in a work cell by a fitter and a welder. the fitter takes 5.5 min to load components into the welding fixture at the beginning of the work cycle, and 1.5 min to unload the completed weldment at the end of the cycle. the total ength of the weld seams 1200 mm, and the travel speed used by the welder averages 300 mm/min. every 600 mm of seam length, the welding stick must be changed, which takes 0.8 min. while the fitter is working, the welder is idle (resting): and while the welder is working the fitter is idle. (a) determine the average arc-on time as a fraction of the work cycle time. (b) how much improvement in arc-on time would result if the welder used flux-cored arc welding (manually operated), given that the spool of weld wire must be changed every 10 weldments, and it takes the welder 5.0 min to accomplish the change? (c) what are the production rates for these two cases (weldments completed per hour)? attach your work and solutions.