subject
Engineering, 11.06.2021 14:00 hellokitty1647

chart below, answer the following questions 40 2.00 6.00 8.00 10.00 12.00 14.00 16.00 Time left 0:41:27 5,000 0* 5,000 Haul 1 -10,000 15,000 Haul 2 Haul 3 -20,000 25,000 v 30,000 -35,000 At what stations we have Transitional Point(s)? choose all the correct answers Select one or more A 8+00 B. 11.00 EC 9+00 D.2-00 E 5-00 Given the mass diagram presented in the chart above What would be the appropnate machine for Haul 1? Select one or more D A Trucks B. Push-loaded scraper DC Large Dozer Given the mass diagram presented in the chart above At the end of the project, which of the following cases applies? Select one or more A The contractor needs to haul materials out of the site, B. The contractor needs to haul matenals into the site COMPANY

ansver
Answers: 3

Another question on Engineering

question
Engineering, 04.07.2019 18:10
Asingle-geared blanking press has a stroke of 200 mm and a rated capacity of 320 kn. a cam driven ram is assumed to be capable of delivering the full press load at constant force during the last 15 percent of a constant-velocity stroke. the camshaft has an average speed of 90 rev/min and is geared to the flywheel shaft at a 6: 1 ratio. the total work done is to include an allowance of 16 percent for friction a) estimate the maximum energy fluctuation b) find the rim weight for an effective diameter of 1.2 m and a coefficient of speed fluctuation of 0.10
Answers: 1
question
Engineering, 04.07.2019 18:20
Derive the correction factor formula for conical nozzle i=-(1+ cosa) and calculate the nozzle angle correction factor for a nozzle whose divergence hal-fangle is 13 (hint: assume that all the mass flow originates at the apex of the cone.
Answers: 3
question
Engineering, 04.07.2019 18:20
Water vapor initially at 10 bar and 400 °c is contained within a piston-cylinder assembly. the water lost heat to the surrounding according to isochoric (iso-volumetric) process until its temperature is 150 °c. the water is then condensed isothermally to saturated liquid. for the water as a system, calculate the work in kj/kg
Answers: 2
question
Engineering, 04.07.2019 19:10
Asteel wire of 2 mm diameter is fixed between two points located 2 m apart. the tensile force in the wire is 250n, if its density of steel is given by 7830 kg/m3 the fundamental frequency of vibration hz? ?
Answers: 3
You know the right answer?
chart below, answer the following questions 40 2.00 6.00 8.00 10.00 12.00 14.00 16.00 Time left 0:41...
Questions
question
Mathematics, 20.09.2020 14:01
Questions on the website: 13722363