Engineering, 17.06.2021 14:00 hdjehd
Một trong những đặc điểm của động cơ khi ở trạng thái động cơ: *
Answers: 1
Another question on Engineering
Engineering, 03.07.2019 15:10
Apiston-cylinder with a volume of 0.25 m3 holds 1 kg of air (r 0.287 k/kgk) at a temperature of 100 c. heat transfer to the cylinder causes an isothermal expansion of the piston until the volume triples. how much heat is added to the piston-cylinder?
Answers: 3
Engineering, 04.07.2019 18:10
Coiled springs ought to be very strong and stiff. si3n4 is a strong, stiff material. would you select this material for a spring? explain.
Answers: 2
Engineering, 04.07.2019 18:10
Afull journal bearing has a journal diameter of 27 mm, with a unilateral tolerance of -0.028 mm. the bushing bore has a diameter of 27.028 mm and a unilateral tolerance of 0.04 mm. the l/d ratio is 0.5. the load is 1.3 kn and the journal runs at 1200 rev/min. if the average viscosity is 50 mpa-s, find the minimum film thickness, the power loss, and the side flow for the minimum clearance assembly.
Answers: 1
Engineering, 04.07.2019 18:10
Awall of 0.5m thickness is to be constructed from a material which has average thermal conductivity of 1.4 w/mk. the wall is to be insulated with a material having an average thermal conductivity of 0.35 w/mk so that heat loss per square meter shall not exceed 1450 w. assume inner wall surface temperature of 1200°c and outer surface temperature of the insulation to be 15°c. calculate the thickness of insulation required.
Answers: 3
You know the right answer?
Một trong những đặc điểm của động cơ khi ở trạng thái động cơ: *...
Questions
History, 24.04.2021 03:50
English, 24.04.2021 03:50
Mathematics, 24.04.2021 03:50
Mathematics, 24.04.2021 03:50
Mathematics, 24.04.2021 03:50
Mathematics, 24.04.2021 03:50
Mathematics, 24.04.2021 03:50
Mathematics, 24.04.2021 03:50
Health, 24.04.2021 03:50
Health, 24.04.2021 03:50
Mathematics, 24.04.2021 03:50
