Engineering, 21.06.2021 01:50 issapolly
Vật liệu sấy có năng suất 0.1 tấn/h, độ ẩm ban đầu W1=50%, độ ẩm cuối W2=10%. Trạng thái vào của không khí t=20 độ C,
Answers: 2
Engineering, 04.07.2019 18:10
Which one from below is not one of the reasons of planning failures? (clo3) a)-planner is careless. b-planner spend less time in the field but more time on the desk c)-planner is not qualified d)-planner does not have sufficient time to properly plan
Answers: 3
Engineering, 04.07.2019 19:10
The sum of the normal stresses does not change as the stress state rotates through an angle. a)-trune b)- false
Answers: 2
Engineering, 04.07.2019 19:10
Apressure vessel with an r/t 20 cannot be treated as thin walled vessel. a)-trune b)- false
Answers: 3
Engineering, 04.07.2019 19:10
An engine, weighing 3000 n, is supported on a pedestal mount. it has been observed that the engine induces vibration into the surrounding area through its pedestal at the maximum operating speed. determine the stiffness of the dynamic vibration absorber spring in (n/m) that will reduce the vibration when mounted on the pedestal. the magnitude of the exciting force is 250 n, and the amplitude of motion of the auxiliary mass is to be limited to 2 mm note: in this question type-in right numbers, no decimals, no fractions, no unit. approximate to right number if needed
Answers: 3
Vật liệu sấy có năng suất 0.1 tấn/h, độ ẩm ban đầu W1=50%, độ ẩm cuối W2=10%. Trạng thái vào của khô...
Mathematics, 22.07.2019 09:00
Mathematics, 22.07.2019 09:00
Social Studies, 22.07.2019 09:00
History, 22.07.2019 09:00
Social Studies, 22.07.2019 09:00
Physics, 22.07.2019 09:00
History, 22.07.2019 09:00
Mathematics, 22.07.2019 09:00
History, 22.07.2019 09:00
History, 22.07.2019 09:00
Mathematics, 22.07.2019 09:00
Chemistry, 22.07.2019 09:00