The highway sign has a weight of 1500 lbsand is supported by the pipe AB, which has an inner radius of 2.75 in. and an outer radius of 3.00 in. The face of the sign is subjected to a uniform wind pressure of 150 lb/ft2. Determine the state of stress at point D.

An electrical motor raises a 50kg load at a construct velencity .calculate the power of the motor, if it takes 40sec to raise the load through a height of 24m(take g =9.8n/g)

Draw the engineering stress-strain curve for (a) bcc; (b) fcc metals and mark important points.

Awall of 0.5m thickness is to be constructed from a material which has average thermal conductivity of 1.4 w/mk. the wall is to be insulated with a material having an average thermal conductivity of 0.35 w/mk so that heat loss per square meter shall not exceed 1450 w. assume inner wall surface temperature of 1200°c and outer surface temperature of the insulation to be 15°c. calculate the thickness of insulation required.