Engineering, 06.07.2021 21:50 Nolanrdavis
In a CNC machining operation, the has to be moved from point (5, 4) to point(7, 2)along a circular path with center at (7,2). Before starting operation, the tool is at (5, 4).The correct G and M code for this motion is
Answers: 3
Engineering, 04.07.2019 18:10
Ariver flows from north to south at 8 km/h. a boat is to cross this river from west to east at a speed of 20 km/h (speed of the boat with respect to the earth/ground). at what angle (in degrees) must the boat be pointed upstream such that it will proceed directly across the river (hint: find the speed of the boat with respect to water/river)? a 288 b. 21.8 c. 326 d. 30.2
Answers: 3
Engineering, 04.07.2019 18:10
Different types of steels contain different elements that alter the characteristics of the steel. for each of the following elements, explain what the element does when alloyed with steel.
Answers: 2
Engineering, 04.07.2019 18:10
Which of the following refers to refers to how well the control system responds to sudden changes in the system. a)-transient regulation b)- distributed regulation c)-constant regulation d)-steady-state regulation
Answers: 1
Engineering, 04.07.2019 18:20
Asolid cylinder is concentric with a straight pipe. the cylinder is 0.5 m long and has an outside diameter of 8 cm. the pipe has an inside diameter of 8.5 cm. the annulus between the cylinder ad the pipe contains stationary oil. the oil has a specific gravity of 0.92 and a kinematic viscosity of 5.57 x 10-4 m2/s. most nearly, what is the force needed to move the cylinder along the pipe at a constant velocity of 1 m/s?
Answers: 3
In a CNC machining operation, the has to be moved from point (5, 4) to point(7, 2)along a circular p...
English, 30.01.2020 13:54
Mathematics, 30.01.2020 13:54
Mathematics, 30.01.2020 13:54
English, 30.01.2020 13:54
Mathematics, 30.01.2020 13:54
Health, 30.01.2020 13:54
Mathematics, 30.01.2020 13:54
French, 30.01.2020 13:54
Mathematics, 30.01.2020 13:54
Mathematics, 30.01.2020 13:54
Health, 30.01.2020 13:54
Geography, 30.01.2020 13:54
History, 30.01.2020 13:54