Engineering, 07.07.2021 14:00 jstephanie644

Across 2. a P type material is missing this
6. the base of this transistor is made of a P type
material
7. these have no moving parts and act as electrical
switches
10. these are used in radio circuits and PCM's
13. these are used in bridge rectifiers
14. controlling high current flow, small size and low
power consumption are advantages of this type of
transistor
15. one of the materials used as a base for
Semiconductors
Created using the Crossword Maker on The Teachers Corner. net
Down
1. one of the materials used as a base for
semiconductors
3. acts as a solid state relay
4. what a diode will do when forward blased
5. what an LED produces when forward biased
B. components using semiconductor material are
called this
9. direction a diode is installed
11. the leg that does not have power applied in a NPN
transistor
12. process of adding impurities to a silicon base

Answers: 1

Show answers

Another question on Engineering

Engineering, 03.07.2019 23:20

Two technicians are discussing the intake air temperature (iat) sensor. technician a says that the computer uses the iat sensor as a backup to the engine coolant temperature (ect) sensor. technician b says that the powertrain control module (pcm) will subtract the calculated amount of fuel if the air measures hot. who is correct

Answers: 3

Answer

Engineering, 04.07.2019 18:10

Abrake has a normal braking torque of 2.8 kip in and heat-dissipating cast-iron surfaces whose mass is 40 lbm. suppose a load is brought to rest in 8.0 s from an initial angular speed of 1600 rev/min using the normal braking torque; estimate the temperature rise of the heat dissipating surfaces.

Answers: 3

Answer

Engineering, 04.07.2019 18:10

Aflywheel accelerates for 5 seconds at 2 rad/s2 from a speed of 20 rpm. determine the total number of revolutions of the flywheel during the period of its acceleration. a.5.65 b.8.43 c. 723 d.6.86

Answers: 2

Answer

Engineering, 04.07.2019 18:10

Asingle-geared blanking press has a stroke of 200 mm and a rated capacity of 320 kn. a cam driven ram is assumed to be capable of delivering the full press load at constant force during the last 15 percent of a constant-velocity stroke. the camshaft has an average speed of 90 rev/min and is geared to the flywheel shaft at a 6: 1 ratio. the total work done is to include an allowance of 16 percent for friction a) estimate the maximum energy fluctuation b) find the rim weight for an effective diameter of 1.2 m and a coefficient of speed fluctuation of 0.10

Answers: 1

Answer

You know the right answer?

Across 2. a P type material is missing this
6. the base of this transistor is made of a P typ...

Questions