subject
Engineering, 18.07.2021 14:00 meganwintergirl

The discharge from an old sewer 400 m long when flowing full has been measured as 40 l/s. The pipe diameter is 200 mm and has an estimated surface roughness of 0.6 mm. Taking the kinematic viscosity as 1.0 mm/s, calculate the head loss in the pipe. (the non dimensional friction factor -0.02; g is taken as 9.81 m/s²)​

ansver
Answers: 2

Another question on Engineering

question
Engineering, 03.07.2019 15:10
Ahouse has the following electrical appliance usage (1) single 40w lamp used for 4 hours per day (2) single 60w fan used for 12 hours per day (3) single 200w refrigerator that runs 24 hours per day with compressor run 12 hours and off 12 hours find the solar power inverter size in watt with correction factor of 1.25.
Answers: 1
question
Engineering, 04.07.2019 18:10
The filament of an incandescent lamp has a temperature of 2000k. calculate the fraction of radiation emitted in the visible light band if the filament is approximated as blackbody
Answers: 2
question
Engineering, 04.07.2019 18:10
What are the two (02) benefits, which may result from a successful implementation of preventive maintenance (pm) program in an organization? (clo3)a)- lean manufacturing b)-overlapping responsibilities c)-the planner is not qualified d)-accurate contractor information e)-reduction in equipment redundancies f)-accurate stores information
Answers: 3
question
Engineering, 04.07.2019 18:20
Derive the correction factor formula for conical nozzle i=-(1+ cosa) and calculate the nozzle angle correction factor for a nozzle whose divergence hal-fangle is 13 (hint: assume that all the mass flow originates at the apex of the cone.
Answers: 3
You know the right answer?
The discharge from an old sewer 400 m long when flowing full has been measured as 40 l/s. The pipe d...
Questions
question
Mathematics, 08.04.2020 20:15
question
Mathematics, 08.04.2020 20:15
question
Physics, 08.04.2020 20:15
Questions on the website: 13722367