Engineering, 19.07.2021 23:20 ella3714
A balanced three-phase inductive load is supplied in steady state by a balanced three-phase voltage source with a phase voltage of 120 V rms. The load draws a total of 10 kW at a power factor of 0.85 (lagging). Calculate the rms value of the phase currents and the magnitude of the per-phase load impedance. Draw a phasor diagram showing all tlme voltages and currents.
Answers: 2
Engineering, 04.07.2019 18:10
Which of the following refers to refers to how well the control system responds to sudden changes in the system. a)-transient regulation b)- distributed regulation c)-constant regulation d)-steady-state regulation
Answers: 1
Engineering, 04.07.2019 18:10
Which of the following ziegler nichols tuning methods the response of the controller to a step input should exhibit an s-shaped curve? a)-open loop mode b)-closed loop mode c)-both modes (open & closed) d)-none of the modes (open & closed)
Answers: 3
Engineering, 04.07.2019 18:20
Modern high speed trains do not have perpendicular expansion gaps where rails are joined end-to-end any more they are mostly welded together but what might happen if there was a spell of particularly hot weather that causes inspection of the tracks?
Answers: 1
Engineering, 04.07.2019 19:10
Ahelical coil spring has a mean diameter of 50 mm, a wire diameter of 5.5 mm and is wound with a pitch of 10 mm. the spring steel has an ultimate strength of 1250 mpa. find the force needed to compress the spring solid and the wire stress in this condition. state whether the spring will return to its initial length.
Answers: 1
A balanced three-phase inductive load is supplied in steady state by a balanced three-phase voltage...
English, 06.04.2021 17:50
Mathematics, 06.04.2021 17:50
History, 06.04.2021 17:50
History, 06.04.2021 17:50
Mathematics, 06.04.2021 17:50
English, 06.04.2021 17:50
Mathematics, 06.04.2021 17:50
Mathematics, 06.04.2021 17:50
Mathematics, 06.04.2021 17:50
Mathematics, 06.04.2021 17:50
History, 06.04.2021 17:50
Business, 06.04.2021 17:50