Answers: 2
Another question on Engineering
Engineering, 04.07.2019 16:10
The force on a cutting tool are 2600n vertically downward and 2100 horizontal. determine the resultant force acting on the tool and the angle at which it acts.
Answers: 1
Engineering, 04.07.2019 18:10
Afull journal bearing has a journal diameter of 27 mm, with a unilateral tolerance of -0.028 mm. the bushing bore has a diameter of 27.028 mm and a unilateral tolerance of 0.04 mm. the l/d ratio is 0.5. the load is 1.3 kn and the journal runs at 1200 rev/min. if the average viscosity is 50 mpa-s, find the minimum film thickness, the power loss, and the side flow for the minimum clearance assembly.
Answers: 1
Engineering, 04.07.2019 18:10
The higher the astm grain size number, the finer the gran is. a)-true b)-false
Answers: 2
Engineering, 04.07.2019 19:10
10 kg of co2 is initially contained at 400 kpa and 300 k. the gas constant for carbon dioxide is 189 j/lkg k) and has a specific heat ratio, k, of 1.289. isentropic expansion then occurs until the pressure is 200 kpa. a) determine the initial volume of co2 in m. b) determine the final temperature in k. c) determine the work done by the system during the expansion kl.
Answers: 2
You know the right answer?
What is tracer lathe machine...
Questions
Mathematics, 20.11.2020 18:20
Mathematics, 20.11.2020 18:20
Advanced Placement (AP), 20.11.2020 18:20
Mathematics, 20.11.2020 18:20
Business, 20.11.2020 18:20
Mathematics, 20.11.2020 18:20
Mathematics, 20.11.2020 18:20
Mathematics, 20.11.2020 18:20
Mathematics, 20.11.2020 18:20
Advanced Placement (AP), 20.11.2020 18:20
Social Studies, 20.11.2020 18:20
