Engineering, 23.07.2021 04:20 kamrulh278
What are the assumptions made for air standard cycle analysis?
a. The working medium is prefect gas throughout i. e. it follows PV=mRT
b. The working medium does not undergo any chemical change throughout the cycle
c. The compression and expansion processes are reversible adiabatic i. e. there is no loss or gain in entropy.
d. All of above
Answers: 3
Engineering, 03.07.2019 14:10
When at a point two solid phase changes to one solid phase on cooling then it is known as a) eutectoid point b) eutectic point c) peritectic point d) peritectoid point
Answers: 3
Engineering, 04.07.2019 03:10
What precautions should you take to prevent injuries when dealing with heavy loads?
Answers: 1
Engineering, 04.07.2019 18:10
An air conditioning system consist of a 5 cm diameter pipe, operating at a pressure of 200 kpa. the air initially enters the pipe at 15°c with a velocity of 20 m/s and relative humidity of 80%. if the heat supply throughout the process is 960 w, determine the relative humidity and the temperature at the outlet
Answers: 3
Engineering, 04.07.2019 18:10
Afour cylinder four-stroke in-line engine has a stroke of 160mm, connecting rod length of 150mm, a reciprocating mass of 3kg and its firing order is 1-3-4-2. the spacing between cylinders is 100mm. i. show that the engine is in balance with regard to the primary inertia forces and primary 3. a and secondary inertia couples. li determine the out of balance secondary inertia force ii. propose ways of balancing this out of balance force and discuss the challenges that will arise
Answers: 3
What are the assumptions made for air standard cycle analysis?
a. The working medium is prefect gas...
English, 12.11.2019 23:31
Mathematics, 12.11.2019 23:31
History, 12.11.2019 23:31
Business, 12.11.2019 23:31
Mathematics, 12.11.2019 23:31