Dilate quadrilateral ABCD again with the origin as the center of dilation and a scale factor of -0.5. Note the side lengths of the corresponding sides in each quadrilateral. Round your answers to the hundredths place. Verify that the ratio of each side length of A′1B′1C′1D′1 to the corresponding side length of ABCD is equal to the dilation factor.

Inadequate stores control is not an obstacle to effective work order system. (clo4) a)-true b)-false

Atank with constant volume contains 2.27 kg of a mixture of water phases (liquid-vapor). in the initial state the temperature and the quality are 127 °c and 0.6, respectively. the mixture is heated until the temperature of 160 oc is reached. illustrate the process in a t-v diagram. then, determine (1) the mass of the vapor in kg at the initial state, (2) the final pressure in kpa.

Afoot bridge is made as a simple deck, 4 m long, with a cross section 2 m (wide) and 20 cm thick, and made of wood. the deck is supported at the two ends. the maximum load allowable on the bridge is 10 tons, provided it is uniformly distributed on the deck. to sense this load, a strain gauge is placed at the center of the bridge and its resistance is monitored. if the sensor has a nominal resistance of 350 s2 and a gauge factor of 3.6, what is the reading of the strain gauge at maximum load? the modulus of elasticity for the wood used in the construction is 10 gpa.